Advertisement
Soak function
Press and hold
for 2 seconds
Child lock
Press and hold at the same
time for 3 seconds
Add water
When you choose "Normal" , "Speedy" , "Air Dry" , "Blanket" ,
"Soft" , "Baby" or "Delicate" program, you can use soak
function before wash.
After selecting the program, press "WASH" key for 2 seconds
to set soak function.
When you set this function, the wash procedure can not be
cancelled.
.Before start
1
You can set child lock by pressing and holding
"WATER LEVEL" key and "PRESET TIME" key
at the same time for 3 seconds.
"CHILD LOCK" is displayed on the operation panel.
Press "START/PAUSE" and the machine is locked.
Press and hold these keys for 3 seconds again to
unlock this function.
.After start
2
You can set this function with the same way as
the machine is locked directly with the same way
as
1
During wash (including rinse), press "WATER LEVEL" key to
add water as necessary.
Un-press will stop adding.
Or pause the washing machine by pressing "START/PAUSE"
key, and press "WATER LEVEL" key to select water level, then
press "START/PAUSE" key again.
When you reset higher water level than present:
The washing machine will add water to the setting level
automatically and continue working.
When you reset lower water level than present:
The new water level will be valid in next water inlet.
to unlock this function.
,
1
Advertisement
