Makita CW003G Instruction Manual page 10

2. Turning on the appliance
Press the power button to turn on the appliance. Press
the power button again to turn off the appliance.
3. Switching cooling / heating mode
Press the cool / heat switch button to switch the
operating mode.
• When the appliance operates in cooling mode, the
lamp of cooling mode lights up.
• When the appliance operates in heating mode, the
lamp of heating mode lights up.
The temperature display flashes the control temperature.
4. Selecting the control temperature
Press the temperature plus button or the temperature
reduction button to select the control temperature. Refer
the chapter "SPECIFICATIONS" for the selectable
control temperature.
The appliance starts cooling / heating 5 seconds after
without any operation, then the control temperature stop
flashing and the temperature display shows the current
temperature.
The appliance stops cooling / heating when the current
temperature reaches the control temperature.
Tips for efficient cooling
• Opening the upper cover for long periods can
cause significant increase of the temperature in
the chamber.
• Regularly clean surfaces that can come in contact
with food and accessible drainage systems.
• Store raw meat and fish in suitable containers in
the chamber, so that it is not in contact with or drip
onto other food.
• If the chamber is left empty for long periods:
- Switch off the appliance.
- Defrost the chamber.
- Clean and dry the chamber.
- Leave the upper cover open to prevent mold
developing within the chamber.
FUNCTION
Indicating the remaining battery
capacity
The battery indicator shows the remaining battery
capacity. The remaining battery capacity is shown as
the following table.
Battery indicator status
Lighted
(Blinking)
(Only for battery cartridges with
the indicator)
Press the check button on the battery cartridge to
indicate the remaining battery capacity. The indicator
lamps light up for a few seconds.
► Fig.3 1. Indicator lamps
Indicator lamps
Lighted
10 ENGLISH
Off
50% to 100%
2. Check button
Off Blinking
75% to 100%
50% to 75%
25% to 50%
malfunctioned.
Remaining
capacity
20% to 50%
0% to 20%
Charge the
battery.
Remaining
capacity
0% to 25%
Charge the
battery.
The battery
may have