Table of Contents
Advertisement
Chapter 2 Convenient Features
1.2.4 Server
If you move the cursor to Server, the Server menu screen appears. For the menu that has
the cursor to it and then press the <Enter> key to show its submenus.
The Server menu screen shows the options you can configure and their features. For the menu System
Management, move the cursor to it and then press the <Enter> key to show its submenus.
Option
System Management
Power Control Configuration
Assert NMI on PERR
Assert NMI on SERR
FRB-2 Policy
Boot Monitoring
Boot Monitoring Policy
Thermal Sensor
Parameter
–
–
–
–
Disabled
Enable or disable feature to detect PCI PERR.
[Enabled]
Disabled
Enable or disable feature to detect PCI SERR.
[Enabled]
[Retry 3 Times]
Specify how the system should operate if FRB level 2
errors occur.
Disable FRB2 Timer
Always Reset
[Disabled]
Enable or disable the boot monitoring feature and
specify the timeout period.
5-60 minutes
To use this feature, NEC ESMPRO Agent must be
installed on OS. If starting up an OS on which it is not
installed, disable this feature
[Retry 3 times]
Specify the processing to be done when time-out was
enforced during boot monitoring and the server was
Always Reset
automatically reset.
Retry 3 times: Attempts to boot OS up to three times.
Always Reset: Retries booting the OS repeatedly.
This option can be selected only when Boot
Monitoring has been enabled.
Disabled
Enable or disable the thermal sensor monitoring
feature. If this option is set to Enabled and when
[Enabled]
abnormal temperature is detected, stops POST before
OS starts and waits until the temperature becomes
normal.
Express5800/E120d-M Maintenance Guide
on the left, move
Descriptions
1. System BIOS
67
Advertisement
Table of Contents
