Cisco 1701 Start Manual page 3

Table 1
Cisco Router Model
1711, 1712
1710, 1721, 1751,
1760
2600
3600
3700
Task 3: Start SDM, and Complete the Startup Wizard
To start SDM and begin the router configuration, follow these steps:
Open a web browser on the PC, and enter the following URL:
Step 1
https://10.10.10.1
The https://... specifies that the Secure Socket Layer (SSL) protocol be used for a secure connection.
Note
You can use http://... if SSL is not available.
Enter the username cisco, and password cisco in the login window. If other login windows appear during
Step 2
the startup process, enter the same credentials (cisco/cisco).
The router's home page appears
Step 3
78-16254-01
Router Port Numbers
Cable Type
Crossover, or straight through
with Ethernet switch
Crossover, or straight through
with Ethernet switch
Crossover, orstraight through
with Ethernet switch
Crossover, or straight through
with Ethernet switch
Crossover, or straight through
with Ethernet switch
(Figure
Port Number
WIC 4ESW port 1x
Ethernet 10/100
(Yellow port on router)
Ethernet 0/0 or
FastEthernet 0/0
FastEthernet 0/0 or
FastEthernet 0
FastEthernet 0/0 or
FastEthernet 0
2). Click Security Device Manager in the left frame.
Cisco Security Device Manager (SDM) Quick Start Guide
Use SDM to Configure the Router
LED
Port 1X
ETH ACT or
10/100 ACT
View LED at
port.
View LED at
port.
View LED at
port.
3