Technical Data - DeWalt DCD996TP2 Original Instructions Manual

EnGLIsH
BRUSHLESS CORDLESS 13 mm DRILL/DRIVER, DCD991
BRUSHLESS CORDLESS 13 mm
DRILL/DRIVER/HAMMERDRILL, DCD996
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Power output
No load speed
1st gear
2nd gear
3rd gear
Impact rate
1st gear
2nd gear
3rd gear
Max. torque (hard/soft)
hard
soft
Chuck capacity
Maximum drilling capcity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841:
L (emission sound pressure
PA
level)
L (sound power level)
WA
K (uncertainty for the given
sound level)
Drilling into metal
Vibration emission value a = m/s
h,D
Uncertainty K =
Impact drilling
Vibration emission value a = m/s
h,ID
Uncertainty K =
28
WALT one of the
e
DCD991 DCD996
V 18 18
DC
1/10 1/10
Li-Ion Li-Ion
W 820 820
Drill, Driver/Hammer
min -1 0–450 0–450/500
0–1300 0–1300/1500
0–2000 0–2000/2250
min -1 – 0–8600
– 0–25500
– 0–38250
Nm 95 95
Nm 66 66
mm 1.5–13 1.5–13
mm 55 55
15 15
– 13
kg 1.5 1.6
dB(A) 75 97
dB(A) 86 108
dB(A) 3 3
2 <2.5 <2.5
m/s 2 1.5 1.5
2 – 15.0
m/s 2 – 3.9
Screwdriving
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive
Hammerdrill
DCD991, DCD996
D WALT declares that these products described under Technical
e
Data are in compliance with:
2006/42/EC, EN62841‑1:2009+A11:2010, EN62841‑2‑1:2010,
EN62841‑2‑2.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
D‑65510, Idstein, Germany
22.05.2020
DCD991 DCD996
2
m/s <2.5 <2.5
2
m/s 1.5 1.5
WALT at
e
WALT.
e