Installation - Tripp Lite SmartRack SR1UCAGE Owner's Manual

Installation

Use the security bit to install security screws into a 1U or 2U 4POSTRAILKIT. Use the included cage nuts as necessary
where a 4POSTRAILKIT will not be used.
1
Attach the Hinged Cage on the right side of the rack
and the Latch Bracket on the left side of the rack
Do not fully tighten the screws at this time.
B
B
B
2
A
B .
A
SR1UCAGE
A
SR2UCAGE
A
SR3UCAGE
3
Adjust both pieces as needed so the hinged cage
opens and closes smoothly. Once properly adjusted,
secure by tightening the screws.
SR1UCAGE
SR2UCAGE
SR3UCAGE