Port Adapter Slot Locations on the Supported Platforms
Cisco 7609 Router Slot Numbering
Cisco 7609 routers have eight slots for port adapters. The slots are numbered from right to left. You can
place the port adapters in any of the FlexWAN module slots (slots 2 through 9). Slots 1 is always reserved
for the supervisor engine.
Figure 1-16
FAN
STATUS
1
1
2
3
4
5
Some of the slots used for the FlexWAN module on the Cisco 7609 router can also be used for other
Note
supervisor engines, RSPs, or OSMs. For details, refer to the Cisco 7600 Series Router Installation Guide
at the following URL:
http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_guide_book09186a0080
80269a.html
PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide
1-18
Figure 1-16
FlexWAN and Enhanced FlexWAN Slots in the Cisco 7609 Router
3
5
7
2
4
6
8
FlexWAN module—slot 9
FlexWAN module—slot 8
FlexWAN module—slot 7
FlexWAN module—slot 6
FlexWAN module—slot 5,
shows the slot numbering on a Cisco 7609 router.
9
6
FlexWAN module—slot 4
7
FlexWAN module—slot 3
8
FlexWAN module—slot 2
9
Supervisor engine—slot 1
Chapter 1
PA-POS-1OC3 Overview
OL-6514-04