Auto Dry Cycle (Hde/Hdg5300Aw,Chde/Chdg5300Aw) - Haier HDE5000AW User Manual And Installation Instructions

AUTO DRY CYCLE
HDE/HDG5300AW
1. Touch the Power On/Off button
• T e h computer board will beep once and the dryer will change from off status
to the initial operating status (NORMAL program).
• f I the "Start/Pause" button is not touched in 5 min after powering on, it
automatically cuts off power and returns to off status.
• T e h dryer returns to off status immediately upon end of each cycle. Regardless,
the status of the control panel, touching OFF will stop all operations.
• The default status is "NORMAL" program.
2. Press "Auto-Dry Cycles" button to select a suitable full automatic cycle.
• T e h NORMAL program will be automatically selected after powering on.
If another full automatic program is desired, touch "Auto-Dry Cycles" button
until corresponding indicator turns on.
• To select your desired settings, the "Custom Program" function should be chosen.
The dryer can memorize programs defined by user and display the previous
program upon next application of this function.
• After powering on, select "Auto-Dry Cycles".
3. Touch "Dry Level" button to select a suitable drying level.
• A t f r e powering on, the clothes dryer automatically sets dryness at "NORMAL",
which means a longer drying time. If other drying level is desired, press
"Dry Level" button to select.
4 Touch "Signal" button, and the buzzer will sound upon end of a cycle.
• A t f r e switching on, the dryer automatically sets buzzer at "Softer". The user
may define three prompt sound conditions: "Loud", "Soft" and "Off".
5. Touch the "Wrinkle Saver" button to select a suitable reserved drying
program.
English
32