Bosch GWS 7-100 Original Instructions Manual page 19

Together with the hand guard (accessory), the power tool
can be used for brushing and sanding with elastic sanding
pads.
The power tool is suitable only for working without water.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spindle lock button
(2) On/off switch
(3) Hex key
(4) Speed preselection thumbwheel
(GWS 7-115 E | GWS 7-125 S)
(5) Auxiliary handle (insulated gripping surface)
(6) Locking screw for protective guard
(7) Protective guard for grinding
(8) Protective guard for cutting
Technical Data
Angle grinder
Article number
Rated power input
Rated speed
Max. grinding disc diameter
Internal diameter of disc
Grinding spindle thread
Max. thread length of
grinding spindle
Restart protection
Speed preselection
Weight according to EPTA-Procedure 01:2014
– with low-vibration
auxiliary handle
– with standard auxiliary
handle
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-3.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 91 dB(A); Sound power level
102 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:
Surface grinding (roughing):
2 2
a = 6.5 m/s , K = 1.5 m/s ,
h
Bosch Power Tools
(9) Mounting flange with O‑ring
(10) Grinding disc/cutting disc
(11) Carbide grinding head
(12) Clamping nut
(13) Quick-clamping nut
(14) Two-pin spanner for clamping nut
(15) Handle (insulated gripping surface)
(16) Grinding spindle
(17) Hand guard
(18) Rubber sanding pad
(19) Abrasive disc
(20) Round nut
(21) Cup brush
(22) Extraction guard for cutting with a guide block
(23) Diamond cutting disc
A) Accessories shown or described are not included with the
A)
GWS 7-100 GWS 7-115 GWS 7-115 E
3 601 C88 1.. 3 601 C88 1.. 3 601 C88 2.. 3 601 C88 1.. 3 601 C88 2..
W 720
-1
min 11000
mm 100
mm 16.0
M 10
mm 17
●
–
kg 1.8
kg 1.7
/ II
Grinding with abrasive disc:
a
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
A)
A)
A)
A)
A)
A)
A)
A)
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 7-125 GWS 7-125 S
720 720
11000 2800 – 11000
115 115
22.2 22.2
M 14 M 14
22 22
● ●
– ●
1.9 1.9
1.8 1.8
/ II / II
2 2
= 3.5 m/s , K = 1.5 m/s .
h
English | 19
A)
A)
720 720
11000 2800 – 11000
125 125
22.2 22.2
M 14 M 14
22 22
● ●
– ●
1.9 1.9
1.8 1.8
/ II / II
1 609 92A 4ZA | (26.04.2019)