Makita ELM4110 Original Instruction Manual page 11

reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge,
unless they have been given
supervision or instruction
concerning use of the
appliance by a person
responsible for their safety.
36. If the external flexible cable or
cord is damaged, it shall be
exclusively replaced by the
manufacturer or his service
agent or a similar qualified
person in order to avoid a
hazard (not lighter than
H05VV-F 2 x1.0 mm
H05RN-F 2 x1.0 mm
37. Instructions for the safe
operation of the appliance,
including a recommendation
that the appliance should be
supplied via a Residual
Current Device (RCD) with a
tripping current of not more
than 30 mA.
38. Be careful during adjustment
of the machine to prevent
entrapment of the fingers
between moving blades and
fixed parts of the machine.
39. Always allow the machine to
cool before storing.
40. When servicing the blades be
aware that, even though the
power source is switched off,
the blades can still be moved.
41. Replace worn or damaged
parts for safety; Use only
genuine replacement parts
and accessories.
42. Be careful during adjustment
43. If the supply cord is damaged,
3. PARTS DESCRIPTION (Fig. 1)
or
2
).
2
of the appliance to prevent
entrapment of the fingers
between moving blades and
fixed parts of appliance.
it must be replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
11