Specifications - Makita 9031 Instruction Manual

ENGLISH (Original instructions)
1-1. Lock button
1-2. Switch trigger
2-1. Side grip
2-2. Grip holder
3-1. Rear pulley
3-2. Front pulley
4-1. Arrow

SPECIFICATIONS

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of wood,
plastic and metal materials as well as painted surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
5-1. Nozzle cap
5-2. Nozzle
6-1. Nozzle
6-2. Hose 19
6-3. Hose of vacuum cleaner
6-4. Vacuum cleaner
7-1. Nozzle
Model
Belt size
Belt speed
Overall length
Net weight
Safety class
) : 83 dB (A)
pA
) : 94 dB (A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
ENE052-1
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
ENF002-2
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG905-1
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Belt Sander
Model No./ Type: 9031
Conforms to the following European Directives:
2006/42/EC
ENG900-1
They are manufactured in accordance with the following
standard or standardized documents:
sum)
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
ENG901-1
3
7-2. Hose 19
7-3. Dust collector
8-1. Limit mark
9-1. Brush holder cap
9-2. Screwdriver
9031
30 mm x 533 mm
3.3 - 16.6 m/s (200 - 1,000 m/min)
380 mm
2.1 kg
/II
ENH101-18