Specifications; Ec Declaration Of Conformity - Makita HM1317C Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Blows per minute
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for chiselling work in concrete,
brick, stone and asphalt as well as for driving and com-
pacting with appropriate accessories.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model HM1307,HM1317C
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model HM1307CB
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.35 dB (A)
Model HM1317CB
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3.07 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model HM1307C
Work mode : chiselling function with side handle
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Model HM1307CB
Work mode : chiselling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model HM1317C
Work mode : chiselling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model HM1317CB
Work mode : chiselling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
) : 81 dB (A)
pA
) : 101 dB (A)
WA
) : 81 dB (A)
pA
) : 101 dB (A)
WA
) : 81 dB (A)
pA
) : 101 dB (A)
WA
2
) : 12.5 m/s
h,CHeq
2
2
) : 12.0 m/s
h,CHeq
2
2
) : 8.5 m/s
h,CHeq
2
2
) : 7.0 m/s
h,CHeq
2
HM1317C HM1307C
715 mm
17.0 kg 15.3 kg
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufac-
turer declare that the following Makita machine(s):
Designation of Machine: Electric Breaker
Model No./ Type:
HM1307C,HM1307CB,HM1317C,HM1317CB
Specifications: see "SPECIFICATIONS" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex VIII.
Notified Body:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Identification number 0197
4 ENGLISH
HM1317CB HM1307CB
730 - 1,450
824 mm
19.0 kg
/II
17.3 kg