Connecting To Alexa - Black & Decker LEDUC9-1CCT-ACK User Manual

Connecting to Alexa

To enable voice and app control, pair the control box to Alexa™ using the following steps. Note: If you are already an Alexa™
user, you may be prompted to connect automatically.
STEP 1: Plug the power cord into the control box. Once connected, the
red Wi-Fi light will begin to blink which indicates the device is now in
PAIRING MODE. The red light will blink for approximately five minutes.
After the light stops blinking, the device will no longer be in pairing mode.
Red Wi-Fi Light
To restart PAIRING MODE, unplug the power cord then
reconnect your power cord to your control box.
Note: If you are already an Alexa™ user, you may be prompted to connect automatically.
11
™
STEP 2: Open your Alexa™ App, select
Devices, and select the "+" button to
"Add Device"
STEP 3: Select "Light" > "Black+Decker" STEP 4:
control box
Scan QR code on the STEP 5: Your device is now paired.
The red light should be off.
12