Where To Find More Information - Cisco 7900 Series System Manual

Where to Find More Information

Table 43-6 Phone Configuration Checklist for SIP Protocol (continued)
Configuration Steps
Step 8 Add and configure lines (DNs) on the phone. You can also
configure phone features such as call park, call forward, and call
pickup.
Step 9 Configure speed-dial buttons.
You can configure speed-dial buttons for phones if you want to
provide speed-dial buttons for users or if you are configuring
phones that do not have a specific user who is assigned to them.
Users can change the speed-dial settings on their phones by using
Cisco Unified CallManager User Options.
Step 10 Configure Cisco Unified IP Phone services.
You can configure services for Cisco Unified IP Phone models
7970/71, 7960/61, 7940/41, 7912, 7911, and 7905 and Cisco IP
Communicator if you want to provide services for users or if you
are configuring phones that do not have a specific user who is
assigned to them. Users can change the services on their phones
by using the Cisco Unified CallManager User Options window.
Step 11 Customize phone button templates and softkey templates, if
required. Configure templates for each phone.
Step 12
Configure the Busy Lamp Field feature, if required. You must use
customized phone button templates to configure BLF/SpeedDial
buttons.
Step 13 Assign services to phone buttons, if required.
Step 14 Provide power, install, verify network connectivity, and configure
network settings for the Cisco Unified IP Phone.
Step 15 Associate user with the phone (if required).
Step 16 Make calls with the Cisco SIP IP Phone.
Where to Find More Information
Related Topics
•
•
•
Cisco Unified CallManager System Guide
43-34
Understanding Directory Numbers, page 18-1
Voice Mail Connectivity to Cisco Unified CallManager, page 29-1
Enabling Autoregistration, Cisco Unified CallManager Administration Guide
Chapter 43
Procedures and Related Topics
Configuring a Directory Number, Cisco
Unified CallManager Administration Guide
Configuring Speed-Dial Buttons, Cisco
Unified CallManager Administration Guide
Configuring Cisco Unified IP
Unified CallManager Administration Guide
Configuring Phone Button
Unified CallManager Administration Guide
Configuring Cisco Unified IP
Unified CallManager Administration Guide
Adding Nonstandard Softkey
Cisco Unified CallManager Administration
Guide
BLF/SpeedDial Configuration
Unified CallManager Administration Guide
Adding a Cisco Unified IP Phone Service to a
Phone Button, Cisco Unified CallManager
Administration Guide
Cisco Unified IP Phone Administration Guide
for Cisco Unified CallManager
Associating Devices to an End
Unified CallManager Administration Guide
Refer to the user guide for your Cisco SIP IP
Phone.
Cisco Unified IP Phones
Phones, Cisco
Templates, Cisco
Phones, Cisco
Templates,
Settings, Cisco
User, Cisco
OL-14153-01