Table of Contents
Advertisement
CONNECT THE BLUETOOTH SAFE
IMPORTANT: Your Bluetooth must be enabled and you must be within range of the lock.
1. Slide hand across the touchscreen on the Safe to activate the Safe. (Digital keys are lit when activated).
2. Click the
icon on the start screen.
3. Select "Safe Lock".
4. Click on available safe.
5. Follow prompts to name the device.
After you have connected the safe to the Bluetooth App, the Admin. Digital Passcode must be reprogrammed
by going to the "Safe Setting" page.
MANAGE SAFE SETTINGS
Select your device and go to "Safe Settings" by selecting the "Settings icon"
SET ADMIN PASSCODE
IMPORTANT: Your Bluetooth must be enabled and you must be within range of the safe.
1.
Select "Admin Passcode" from the list.
2.
You will be prompted to enter your Honeywell Account Password.
3.
Enter a new 4 to 9 digit password of your choice and press "
CHANGE SAFE NAME
1. Select "Name" from the list.
2. Input the name you want to assign to this safe and press "
ACTIVATE AUTO LOCK
1. Select "Auto Lock" from the list.
2. Toggle Auto Lock On/Off. (if toggle does not work press "check time" at the bottom)
3. Input the Set Time for Auto Lock.
4. Press "OK" to Save changes.
NOTE: Auto lock can also be programmed using the digital keypad.
ADD SAFE TO GROUP
If no groups exist you will have to create one. Press "Create Group" and enter the group name.
1.
Select "Group" from the list.
2.
To create a new group, press "Create Group" and enter the group name.
3.
Select the Group to place the lock in.
UPGRADE THE CONNECTED SAFE
In order to upgrade you have to be the Admin for the safe, and within Bluetooth range.
The App and the safe have been successfully connected when the green light turns on, indicating
that the lock is upgrading.
1. Press "Lock Upgrade" from the list to Check for Updates.
2. Press "Upgrade' (in case a pop up notification appears, follow it to finish the upgrade).
".
".
6
in the top right corner of the screen.
Advertisement
Table of Contents
