System Connections - Sharp CP-XP120H Operation Manual

System connections

CD-XP120H
ENGLISH
FM aerial
AM loop aerial
Right speaker
Right speaker
Wall socket
(AC 230 V, 50 Hz)
Plain
White line
E-7
! Removing the transport screw
Before turning the power on, be sure to remove the transport
screw on the back of the unit using a flat head screwdriver or a
coin.
Note:
This screw is required when transporting the unit again. Please
keep it (see page 24).
Transport
! Aerial connection
screw
Left speaker
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
Left speaker
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.
02/4/15
< Attaching to the wall >
Wall Screws (not supplied)
External FM aerial
CD-XP120H(H)E1.fm