Advertisement
The former can be used to monitor door opening and closing for example whilst the latter
can be used for photoelectric alarm systems etc.
Firstly before carrying out this programming ensure that none of the inputs are in the alarm
condition.
Messages on Transitions
To configure each alarm it is necessary to send a message to the Archimedes as follows
# Number of
Contact
Field
#
Contact No
#
Message
#
Transition
#
No Tel 1
#
No Tel 2
#
No Tel 3
#
• Note * The telephone number must always be inserted with its international code ie
+44 for UK, +49 for Germany , +33 for France etc
• All SMS messages must end with a # sign
# Message
# Transition # Tel 1 # Tel 2
Quantiy Characters
1
1
1
Max 20
1
1
1
20 Max
1
20 Max
1
20 Max
1
Messages on Change of State
Description
Delimit Character
1...8 Dependant on Contact No
Delimit Character
Message to be sent to identify alarm
Delimit Character
Type of Transition/Change of State
T=Transition
S=StateChange
Delimit Character
First Tel Number to send the Alarm Message
Delimit Character
Second Tel Number to send the Alarm
Message
Delimit Character
Third Number to send the Alarm Message
Delimit Character
# Tel 3 #
10
Advertisement
