Cisco 7000 Manual page 13

This document is to be used in conjunction with the Cisco 7000 Hardware Installation and Maintenance publication.
APPI, ciscoBus, Cisco Systems, CiscoWorks, CxBus, Netscape, The Packet, and SMARTnet trademarks, and the Cisco logo is a registered
trademark of Cisco Systems, Inc. All other products or services mentioned in this document are the trademarks, service marks, registered
trademarks, or registered service marks of their respective owners.
Copyright © 1993, Cisco Systems, Inc.
All rights reserved.
If the front-panel Normal LED fails to light but the RP Normal LED
does light, suspect that the new LED board is not functioning properly.
Step 4:
If after several attempts, the LED board does not appear to be functioning
properly, or if you experience trouble with the installation (for instance, if the
guide pins do not align with the holes in the board), contact a customer
service representative or refer to "Obtaining Technical Assistance" on page 2
for further instructions.
This completes the LED board replacement.