Cisco 7935 System Manual page 44

Phone Administration Tips
Note
Messages Button
Note
Note
Cisco CallManager System Guide
40-44
The list in the Find and List Phones window does not include analog
phones and fax machines that are connected to gateways (such as a
Cisco VG200). This list shows only phones that are configured in
Cisco CallManager Administration.
By performing the following actions, you can configure a voice-messaging access
number for the messages button on Cisco IP Phone models 7970, 7960, and 7940,
so users can access the voice-messaging system by simply pressing the messages
button:
1. Configure the voice-mail pilot number by choosing Feature > Voice Mail >
Voice Mail Pilot.
Configure the voice-mail profile by choosing Feature > Voice Mail >
2.
Voice Mail Profile.
Choose the appropriate profile from the Voice Mail Profile field on the
3.
Directory Number Configuration window. By default, this field uses the
default voice-mail profile that uses the default voice-mail pilot number
configuration.
Typically, you can edit the default voice-mail pilot and default voice-mail profiles
to configure voice-messaging service for your site.
For more information on configuring a voice-messaging service, see
Connectivity to Cisco CallManager, page
For the Cisco IP Phone models 12 SP+ and 30 VIP, you can use phone button
templates to configure a button with the message-waiting feature for access to a
voice-messaging service.
Chapter 40
26-1.
Cisco IP Phones
Voice Mail
OL-7135-01