Setting The Limited Functions Mode From The Service Call Message Screen - Canon imageRUNNER ADVANCE C9270 PRO Basic Operation Manual

Setting the Limited Functions Mode from the Service Call
Message Screen
When [Limited Functions Mode] is displayed, follow the procedures below.
If you turn OFF the main power switch when there is a job waiting to print, that job is erased.
If you set Limited Functions Mode to 'On' from the Service Call Message screen, [Limited Functions Mode] in [Management
Settings] (Settings/Registration) is also set to 'On' . (See e-Manual > Security.)
Press [Limited Functions Mode]  [Yes].
1
A message prompting you to restart the machine (turning the main power switch OFF, and then
ON) appears.
Turn OFF the main power of the main unit.
2
b_04_076_00_C
Wait at least 10 seconds after the Main Power Indicator is turned off , and then
3
turn the main power switch back to ON.
262
1. Open the main power switch
cover.
3
2. Press the main power switch
to the " " side.
3. Close the main power switch
cover.
1. Open the main power switch
cover.
3
2. Press the main power switch
to the "I" side.
3. Close the main power switch
cover.
The machine starts up in the
Limited Functions mode.