Resetting Your Network Settings; Updating The Software - Bosch WTX87P90IL Installation And Operating Instructions Manual

Home Connect
en
Resetting your network
settings
You can reset all of the network
settings.
Ensure that you are in the Home
Connect menu. ~ Page 34
Set the programme to position 5.
1.
§"à (reset network settings)
appears in the display.
Press Start/ A Reload.
2.
¢"à appears in the display.
Press Start/ A Pause.
3.
If you want to operate your
Note:
appliance via the Home Connect app
again, you will need to reconnect it to
your home network and to the
Home Connect app.
38

Updating the software

You can update the Home Connect
software on your appliance. As soon as
a new software update is available, a
note appears in the display: —˜š
Install the update directly via the
message in the display or manually as
follows:
Ensure that you are in the Home
Connect menu. ~ Page 34
Set the programme to position 6.
1.
—˜š (update) appears in the display.
Start/ A Pause flashes if a software
update is available.
Press Start/ A Reload.
2.
¢"à appears in the display.
Press Start/ A Reload.
3.
The software update may take
Note:
several minutes. Do not switch the
appliance off while updates are being
installed.