Commissioning; Oil Supply - ABB HT847111 Operation Manual

Operation Manual / TPL76-C32/-C33/-C34/-C35
3 Commissioning / 3.1 Oil supply

3 Commissioning

3.1 Oil supply

© Copyright 2021 . All rights reserved.
A carefully designed and installed oil supply, which functions in all pos-
sible operational conditions, is an important prerequisite for trouble-
free turbocharger operation.
The turbocharger is normally lubricated with oil from the engine oil cir-
cuit.
NOTICE
With regard to the oil supply, please observe the engine builder's spe-
cifications for lubricating oil selection, oil change intervals, oil filtration,
oil pressure and oil temperature.
Oil filtration
A lubrication oil filter system with a mesh size ≤0.050 mm is adequate
for TPL76-C turbochargers.
NOTICE
This filter system can also be achieved by using an additional self-clean-
ing fine filter.
HZTL2485_EN Rev.G July 2021