Battery Replacement - HP d325 MT Hardware Reference Manual

The battery that comes with the computer provides power to the real-time clock.
When replacing the battery, use a battery equivalent to the battery originally installed
in the computer. The computer comes with a 3-volt lithium coin cell battery.
The lifetime of the lithium battery can be extended by plugging the computer into a
live AC wall socket. The lithium battery is only used when the computer is NOT
connected to AC power.
WARNING: The computer contains an internal lithium manganese dioxide battery. There is a
risk of fire and burns if the battery is not handled properly. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose to temperatures higher than 60 C (140 F).
Do not dissassemble, crush, puncture, short external contact, or dispose of in fire or
water.
Replace the battery only with the HP spare designated for this product.
CAUTION: Before replacing the battery, it is important to back up the computer CMOS
settings. When the battery is removed or replaced, the CMOS settings will be cleared.
Refer to the Computer Setup (F10 ) Utility Guide on the Documentation Library CD for
information on backing up the CMOS settings.
Batteries, battery packs, and accumulators should not be disposed of together with the
general household waste. In order to forward them to recycling or proper disposal, please
use the public collection system or return them to HP, their authorized partners, or their
agents.
Hardware Reference Guide

Battery Replacement

C
C-1