Notes On Operating Environment; Notes On Use When The [Windows Firewall] Function Is Enabled; Notes On Use With Windows Server 2003/Windows Server 2008 And Internet Explorer 9 Or Greater - Canon VB-M40 Operation Manual

Notes on Operating Environment

Notes on Use When the [Windows
Firewall] Function is Enabled
When the VB Initial Setting Tool is started, the [Windows
Security Alert] dialog box may appear.
If the [Windows Security Alert] dialog box appears, click
[Unblock].
Once this button is clicked, the warning dialog box will no
longer appear.
If the [Windows Security Alert] dialog box does not appear,
the Windows firewall warning function may be disabled.
Follow the procedure below to add the [VB Initial Setting
Tool] as a Windows Firewall exception.
Click [Windows Firewall] in [Control Panel] > [System
1
and Security].
Click [Allow a program or feature through Windows
2
Firewall] > [Change settings] > [Allow another
program].
1
-8
Select [VB Initial Setting Tool], and then click [Add].
3
Notes on Use with Windows Server 2003/
Windows Server 2008 and Internet
Explorer 9 or Greater
Registering the Top Page of the Camera as a
Trusted Site
In Windows Server 2003, Windows Server 2008 and Internet
Explorer 9 or greater, the security level for Internet sites and
intranet sites on Internet Explorer is set to [High] by default.
Thus, when accessing the VB-M700/600/40 Viewer or the
camera's Setting Page, a content block dialog box appears
and the page fails to display correctly.
To correct this problem, follow the procedure below to
register the top page as a trusted site.
Access the VB-M700/600/40 Viewer and the Setting
1
Page from the top page of the camera with Internet
Explorer.
The following dialog box appears.
Click [Add].
2
The [Trusted sites] dialog box appears.