Table of Contents
Advertisement
en Installation instructions
WARNING ‒ Risk of electric shock!
If the insulation of the power cord is dam-
aged, this is dangerous.
▶ Never let the power cord come into contact
with hot appliance parts or heat sources.
▶ Never let the power cord come into contact
with sharp points or edges.
▶ Never kink, crush or modify the power
cord.
15.5 Instructions for the electrical
connection
In order to safely connect the appliance to the elec-
trical system, follow these instructions.
¡ The appliance must only be connected to a protect-
ive contact socket that has been correctly installed.
Only a qualified electrician may install a socket or
replace the connecting cable, taking the appropriate
regulations into account.
¡ The appliance must only be connected with the
power cable provided. Connect the power cable to
the back of the appliance.
¡ Connecting cables with various plug types are avail-
able from after-sales service.
¡ No multi-plugs, multiple connectors or extension
leads must be used. Overloading causes a risk of
fire.
¡ If the plug can no longer be reached after the in-
stallation, a partition must be provided in the phases
in the permanent electrical installation in accord-
ance with the installation regulations.
15.6 Tools
You require the following tools for the installation.
¡ Measuring tape
¡ Calliper
¡ Pencil
¡ Angle bracket
¡ Torx 20 screwdriver
¡ Large flat-tipped screwdriver
¡ Combination pliers
15.7 Installation
Preparing the appliance
A pump that contains oil is installed in the appliance. If
the incline is too great, this oil may flow out of the
pump. Do not tip the appliance or upend it.
ATTENTION!
The oil from the vacuum pump may leak out when it is
tipped or tilted, and may damage the appliance.
Do not move the appliance if the transport locks for
▶
the pump are not installed.
When uninstalling the appliance, secure the trans-
▶
port locks again before moving the appliance.
Requirement: Use a suitable tool to remove the trans-
port locks and install the oil filter.
16
Carefully lift the appliance out of the packaging.
1.
Remove the transport lock for the pump from the
2.
top of the appliance.
Secure the transport lock to the rear of the appli-
3.
ance for further use.
Install the oil filter.
4.
Advertisement
Table of Contents
