Table of Contents
Advertisement
Equipment Required
a. USB memory
b. Remote Control Unit
Firmware Update Procedure
1. Turn the power on.
2. Press [0], [6], [2], [5], [9], [6] and [Info] buttons on
the remote control unit in the order.
SAM mode menu screen appears.
3. Press [MENU] button on the remote control unit.
Menu screen apears.
4. Insert the USB memory to the USB port as shown
below.
Software Upgrade Menu is displayed
automatically.
Rear Cabinet
5. Press [OK] button to select "Yes" .
6. Upgrade process will start automatically.
7. Wait for the "Upgrade successful" message before
restarting the set to complete upgrade process.
FIRMWARE RENEWAL MODE
USB Port
7-1
PL9.0FW
Advertisement
Table of Contents
