Installation Instructions; Installing Your Gas Range; Step 1. Unpack The Range; Step 2. Connect The Range To Gas Supply - Samsung NX60A6 DG68 Installation Manual

Additional installation requirements for mobile homes
The installation of appliances designed for mobile home installation must conform
with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part
3280 (formerly the Federal Standard for Mobile Home Construction and Safety,
Title 24, HUD, Part 280) or, when such standard is not applicable, the Standard
for Manufactured Home Installations, latest edition (Manufactured Home Sites,
Communities and Set-Ups), ANSI A225.1, latest edition, or with local codes. In
Canada, mobile home installation must be in accordance with the current CAN/CSA
Z240/MH Mobile Home Installation Code.
Power cord location
2" 2"
7 7 / / " "
1 1
8 8
Power cord location
Install_NX60A6_DG68-01337B-00_MES+EN.indb 17 Install_NX60A6_DG68-01337B-00_MES+EN.indb 17
The power cord for this appliance is located
on the back of the range, near the bottom
right hand corner. The 53-in (135-cm)
power cord will come installed on the range
and taped to the back for shipping.

Installation instructions

Installing your gas range

IMPORTANT:
Please read the following instructions, as well as the Important Safety Instructions
section at the front of this manual, completely and carefully BEFORE installing
and/or operating the gas range. Improper installation, adjustment, service, or
maintenance can cause personal injury or property damage.
To order parts or accessories, contact your
local retailer or refer to the last page.
To ensure proper installation, we strongly
recommend that you hire a professional
installer.

Step 1. Unpack the range

Remove all packaging materials. Failure to remove packaging materials could
result in damage to the appliance.
Inventory all loose parts against the Parts supplied components listed on page 11.
Check for shipping damage and/or missing parts. Any damage and/or missing
parts should be reported to your local retailer.

Step 2. Connect the range to gas supply

Shut off the main gas supply valve before disconnecting the old range and leave
it off until the new hookup has been completed. Don't forget to relight the pilot on
other gas appliances when you turn the gas back on.
Because hard piping restricts movement of the range, the use of a CSA
International-certified flexible metal appliance connector is recommended unless
local codes require a hard-piped connection.
NOTE
NOTE
English 17
2021-02-18 2021-02-18 2:52:25 2:52:25