HP Brio 8300 Online Manual page 53

6 Secure the card with the retaining screw. If you loosened the screws on adjacent faceplates, remember to tighten them.
7 Install any other accessories before returning the computer to the upright position, replacing the cover and
reconnecting the power cords and any telecommunications cables. Turn on the display, and then turn on the computer.
8 If you have just installed a Plug and Play expansion card, Windows is able to recognize and configure the card
automatically. The New Hardware Found dialog box is displayed while Windows loads the necessary driver(s).
If Windows does not find the correct driver, it displays the following choices for you to select:
•
Windows default driver.
(Shaded if the card is not known by Windows). If this option is available, select it.
•
Driver from disk provided by the manufacturer.
If a Windows default driver is not available, and you have a driver disk, select this option. You then need to insert
the disk and click the OK button.
•
Do not install a driver. Windows will not prompt you again.
In this case, the card will be installed but it will not work.
•
Select from a list of alternative drivers.
3 Upgrading and Adding Accessories
Adding Accessories
53