Troubleshooting - Philips AVENT SCF902 User Manual

9

Troubleshooting

If you are unable to solve the problem with the provided information, contact the
Philips AVENT Consumer Care staffs. You can also consult your health professional
or breast-feeding advisor.
Problem Solution
Lack of suction Check that all components are assembled correctly and that the
valve is in positioned correctly.
Make sure that the cap, the diaphragm, and the Let-down Massage
Cushion are fitted securely to the pump body and a perfect seal is
created.
The air pressure in your region is too low, this may affect the
suction.
Make sure the silicone tube is firmly connected to the cap and the
motor, without twisting.
No milk being Make sure the pump is assembled correctly, and the suction is
expressed created.
Relax and try again; as expression may improve with practice.
Refer to the "Hints to help you succeed" section.
Pain in You may be pumping too hard. You do not need to use all
the breast the suction that the pump can generate but the comfortable
area when modes. Press the suction decrease button
expressing the suction intensity.
Consult your health professional/ breast feeding advisor.
Milk is drawn Remove and refit the Let-down Massage Cushion. Make sure
up the Let- that it is installed correctly and firmly.
down Massage Try leaning lightly forward.
Cushion
to lower down
EN 13