Configuring Raid Option Rom - HP Blade dc72 User Manual

To reset to factory settings, select Set Defaults and Exit. This option restores the original
•
factory defaults.
CAUTION: Do NOT turn the computer power off while the ROM is saving the F10 Computer Setup
changes as the CMOS could become corrupted. Only turn the computer off after exiting the F10 Setup
screen.

Configuring RAID Option ROM

You can only access Computer Setup at system startup. To access the Computer Setup Utilities menu and
enable RAID:
Turn on or restart the computer by clicking Start > Shut Down > Restart the Computer.
1.
2. Press Ctrl + I repeatedly as soon as the monitor light turns green to enter the RAID configuration util-
ity. If you do not press Ctrl + I at the appropriate time, you must restart the computer, and then press
Ctrl + I again to access the utility.
The Intel Matrix Storage Manager screen (RAID Option ROM) displays briefly during boot up. The
RAID configuration utility is English only. To configure RAID in other languages, use the Windows-
based RAID configuration utility.
14