Installation Under The Floor (Using The Pdm-4001) - Pioneer PDM-4001 Technical Manual

Special installation (Installation under the floor (using the PDM-4001))

3.4.12 Installation under the floor (using the PDM-4001)

• If protective glass or similar material is used, the multi-installation fixture (PDM-4001) shown in the following figure is
very useful.
Floor
Exhaust
B
A + 50 mm
Exhaust fan
or l e ss
Exhaust port
60 mm
or less
B
| Looking in the direction of the arrow (see the next page)
If the display is used in the closed space, observe the following conditions in the above environment:
Without exhaust fan
With exhaust fan
5 8
C
C
A
Exhaust
Flow of air from the air conditioner
Multi-installation fixture (PDM-4001)
A ≥ 20 mm (clearance between the protective glass and PDP)
B ≥ 100 mm (clearance between the PDP and side wall)
C ≥ 50 mm (clearance between the PDP and side wall)
VIDEO
0~30°C
0~35°C
Protective glass surface
Intake
B
Tempered glass, etc. (permeable)
A + 50 mm
50mm
or l e ss
60 mm or
less
B
PC-9800 (56.4Hz)
Machintosh (66.7Hz)
VGA (60Hz)
0~30°C
0~35°C
C
C
291mm
Intake port
PC-9800 (70.1Hz)
VGA (72.8Hz, 75Hz)
Not usable
0~35°C