DeWalt XR DCD470 Original Instructions Manual page 30

EnGLIsh
54V RIGHT-ANGLE DRILL
DCD470
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No Load Speed
1st Gear
2nd Gear
Max torque (Hard/Soft)
Chuck capacity
Max Capacity
Wood
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into metal
Vibration emission value a
h,M
Uncertainty K =
Drilling into concrete
Vibration emission value a
h,DD
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
28
WALT one of the
e
V
DC
-1
min
-1
min
Nm
mm
mm
kg
dB(A)
dB(A)
dB(A)
= m/s 2
m/s 2
= m/s 2
m/s 2
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
EC-Declaration of Conformity
DCD470
54
2
Li-Ion
0–400
D WALT declares that these products described under
e
0–1320
Technical Data are in compliance with:
269/114
2006/42/EC, EN62841-1:2015 + AC:2015, EN62841-2-1:2018 +
13
A11:2019.
These products also comply with Directive 2014/30/EU and
158
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
7.0
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
84
95
5
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
3.5
65509, Idstein, Germany
1.5 09.02.2022
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
3.6
1.5
D WALT declares that these products described under "technical
e
data" are in compliance with:
EN62841-1:2015 + AC:2015, EN62841-2-1:2018 + A11:2019.
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended).
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
Machinery Directive
54V Right-Angle Drill
DCD470
REGULATIONS 2008
54V Right-Angle Drill
DCD470
WALT at
e
WALT.
e