Power Block - Yamaha MG Series Owner's Manual

o [STEREO] section
USB-REC-L STL MONI
USB-REC-R STR MONI
STEREO
ON
• [ON] switch
Turn this switch on (
master fader. The switch lights when on.
• [STEREO] master fader
For adjusting the level of the signal output to the [STE-
REO OUT] jack.
STEREO OUT L
[+4dBu]
STEREO OUT R
[+4dBu]
) to enable the [STEREO]

Power Block

•
[ / ] POWER switch
Turns power to the unit on or off. Press the switch to the
" " position to turn on the power. Press the switch to the
" " position to turn off the power.
NOTICE
• Note that the trace current continues to flow even while
the switch is in the off position. If you do not plan to use
the mixer for a while, be sure to unplug the power cord
from the wall outlet.
• Rapidly turning the unit on and off in succession can
cause it to malfunction. After turning the unit off, wait for
at least 6 seconds before turning it on again.
•
[AC IN] jack
Connect the included power cord here. First, connect the
power cord to this unit, and then plug it into an AC outlet.
MG20XU/MG20/MG16XU/MG16X/MG16/MG12XU/MG12X/MG12 Owner's Manual
Controls and Connectors
27