12. TECHNICAL INFORMATION................28 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Page 3
ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp • points must be loaded in the basket with their points down or placed in a horizontal position.
Page 5
ENGLISH 2.4 Use be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.
ENGLISH 3.1 Internal light The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp. It Otherwise, it goes off automatically after comes on when you open the door or some time to save energy. switch the appliance on while the door is open.
Indicator Description Drying phase indicator. It is on when you select a programme with the dry‐ ing phase. It flashes when the drying phase operates. Refer to "Pro‐ gramme selection". 5. PROGRAMME SELECTION 5.1 MY TIME ExtraSilent Using MY TIME selection bar, you can...
Page 9
ENGLISH 5.4 Programmes overview Pro‐ Type of load Degree of Programme phases EXTRAS gramme soil Quick • Crockery • Fresh • Wash 50 °C • ExtraPower • Cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry •...
Page 11
ENGLISH dedicated bar of the ECOMETER The lights related to the Previous, OK flashes. and Next are on. The order of the basic settings presented How to change a setting in the table is also the order of the settings on the ECOMETER: Make sure the appliance is in setting mode.
Page 13
ENGLISH in the same cycle or at the beginning of Acoustic signals sound also the next programme. This activity when a malfunction of the increases the total water consumption of appliance occurs. It is not a programme by additional 4 litres and possible to deactivate these the total energy consumption of a signals.
6.7 Latest programme TimeBeam displays the following information on the floor below the selection appliance door: • The programme duration when the You can set the automatic selection of programme begins. the most recently used programme and • 0:00 and CLEAN when the options.
Page 15
ENGLISH CAUTION! The compartment (B) is for rinse aid only. Do not fill it with detergent. CAUTION! Only use rinse aid designed specifically for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse 4. Carefully shake the funnel by its aid reaches the marking ''MAX''.
8. DAILY USE 1. Open the water tap. The upper ends of the two 2. Press and hold until the appliance vertical ribs inside the is activated. compartment (B) indicate 3. Fill the salt container if it is empty.
Page 17
ENGLISH Press and hold for about 3 seconds. It is not possible to activate The appliance returns to the programme or deactivate options while a selection. programme is running. If you cancel the delay start, Not all options are you have to select the compatible with each other.
The function comes into operation The Auto Off function switches the automatically: appliance off automatically. • When the programme is completed. All buttons are inactive except for the • After 5 minutes if a programme was on/off button. not started.
ENGLISH 9.5 Loading the baskets • Make sure that the water softener level is correct. If the level is too high, • Always use the whole space of the the increased quantity of salt in the baskets. water might result in rust on cutlery. •...
Page 20
10.1 Machine Care 10.3 Removal of foreign objects Machine Care is a programme designed to clean the appliance interior with Check the filters and the sump after each optimal results. It removes limescale and use of the dishwasher. Foreign objects grease buildup.
Page 21
ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4.
Page 22
2. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil 3.
ENGLISH 10.8 Cleaning the ceiling element (B) counterclockwise and pull the spray arm downwards. spray arm 3. Wash the spray arm under running water. Use a thin pointed tool, e.g. a We recommend to clean the ceiling spray toothpick, to remove particles of soil arm regularly to prevent soil from from the holes.
Page 24
Problem and alarm code Possible cause and solution The programme does not • Make sure that the appliance door is closed. start. • If the delay start is set, cancel the setting or wait for the end of the countdown.
Page 25
ENGLISH Problem and alarm code Possible cause and solution The appliance stops and • It is normal. It provides optimal cleaning results and en‐ starts more times during op‐ ergy savings. eration. The programme lasts too • If the delay start option is set, cancel the delay setting or long.
Page 26
The PNC can be found on the rating WARNING! plate on the appliance door. You can We do not recommend using also check the PNC on the control panel. the appliance until the Before checking the PNC, make sure the problem has been appliance is in the programme selection.
Page 27
ENGLISH Problem Possible cause and solution Unusual foam during washing. • Use the detergent designed specifically for dishwash‐ ers. • Use a detergent from a different manufacturer. • Do not pre-rinse dishes under running water. Traces of rust on cutlery. •...