Table of Contents
Advertisement
If provided
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Disassembling and assembling
turbocharger
Fitting the gas outlet flange and gas outlet bend
If provided, fit the C-ring (52408).
τ
Fit the gas outlet flange (52400).
τ
In the case of gas outlet bends (51100) from ABB Turbo Systems:
τ
always replace the gasket (52406) (see the chapter entitled Spare
parts).
Apply high-temperature grease to contacting surfaces and threads.
τ
Fit the turbine casing using the nuts (52433) while observing tightening
τ
torques specified in the table of tightening torques.
Fasten the insulation.
τ
Attach pipes in accordance with the enginebuilder's instructions.
τ
Operation Manual / TPS44-F.. - TPS61-F..
8
8.3
Page 108
Advertisement
Table of Contents
