Sony RMF-TX200U Getting Started page 72

You can connect a device to the TV wirelessly, without using a wireless router, and then stream videos,
photos, and music that is stored on your device directly to the TV.
1
To enable [Wi Fi Direct], press the HOME button, then select [Settings] — [Network] —
[Wi Fi Direct] — [Wi Fi Direct].
2
Select [Wi Fi Direct settings].
3
Select the TV name displayed on the TV screen with the Wi-Fi Direct device.
If the device does not support Wi-Fi Direct, select the [Show Network (SSID)/Password].
4
Operate the Wi-Fi Direct/Wi-Fi device to connect with the TV.
5
Send content from the Wi-Fi Direct/Wi-Fi device to the TV.
For details, refer to the instruction manual of the device.
If the connection does not succeed
When the standby screen for the Wi-Fi Direct setting is displayed, select [Show Network
(SSID)/Password] and follow the on-screen instructions to complete the set-up.
To connect another device
Follow the steps above to connect devices. Up to 10 devices can be connected at the same time. To
connect another device when 10 devices are already connected, disconnect an unnecessary device,
then connect the other device.
To change the name of the TV shown on the connected device
Press the HOME button, then select [Settings] — [About] — [Device name].
61