Table of Contents
Advertisement
34
electrolux.com.au
INSTALLATION
INSTALLATION FOR COMBINED COMPACT OVEN & WARMING DRAWER
Ventilation openings
behind, min. 250cm
min.
550
min
100
Back
panels
open
590
+4
600
min.
570
Building in
WARNING
The microwave oven is only compatible with
certain Electrolux warming drawers (e.g.
EWD1402DSE), do not install with a warming
drawer that is not approved by Electrolux.
When building in with a compatible Electrolux warming
drawer, please refer to the instructions supplied for the
warming drawer for installation requirements.
The microwave oven can sit directly on top of the warming
drawer (it does not need a separate base), then follow the
installation requirements on the previous page for installing
the microwave oven.
(CONTINUED)
2
600
560
+8
560
+8
850
Ventilation area in the base min. 250cm
Microwave oven must be
installed minimum height
850mm above the ground
Flush fit top view
infill panel
350mm max. length
20mm
Cupboard
600mm
door
Infill panels are recessed 20mm from the external
cabinet door to accommodate flush fit
595
IMPORTANT
Electrical connection
Refer to the instructions supplied with the warming
drawer for electrical installation requirements of the
warming drawer.
For electrical installation requirements of the
microwave oven please refer to the previous page.
Cupboard
door
Ventilation grid
2
Cupboard feet
min 100
Advertisement
Table of Contents
