Page 1
STEAM IRON Unit USI-193 Instruction manual Precautionary measures When using the appliance observe the following precautions: 1. Read all instructions carefully and save it for future use. 2. Use iron only for its intended purpose. 3. Before using, make sure that your mains voltage corresponds to the voltage specified on the name plate of the iron.
Page 2
A. Soleplate Spraying Water Outlet Water Tank Inlet D. The position of the Self-Cleaning Regulator supply of steam Spraying Water Button G. Steam Shot Button H. Cord Brushing Ready Light Temperature Dial K. MAX. Water Level Soleplate Which is made of stainless steel material, it can be heated up and be used to iron the garment. Spraying nozzle When pressing spraying water button instantly, water is sprayed from this outlet.
Operation of device. 1. Hold the iron vertically, with a slight slope, fill the tank with water, using a measuring cup. You had better use purified water with less calcium particles. Water is not to exceed “Max” level on the tank (See pic 1). 2.
7. Steam shot function had better be used at max temperature, as it helps remove stubborn creases. 8. The iron has an anti-drip function. If iron long during is not used, the sole cools steam generation is automatically switched off to prevent drip through the holes of the sole. 9.
Model: USI-193 Power supple: 230 V ~ 50 Hz Power: 2200 W The head office of the manufacturer : «UNIT Handelsgesellschaft G.m.b.H.» 131, Gersthofer Str., A-1180, Vienna, Austria Exported by: «UNIT Electronics (H. K.) Limited» 3905 Two Exchange Square, 8 Connaught Place, Central, Hong Kong Made in People’s Republic of China (P.R.C.)