Menu SeTTingS
DTV Setup
(in Digital TV Mode only)
● configuration: (Refer to p.34)
● edit channels: (Refer to p.33)
● installation:
- channel Search: (Refer to p.32)
- Software update: (Refer to p.36)
- Default Setting: (for Digital TV Mode Only)
Sets the current all settings of the Digital TV mode to the default
settings.
noTe:
▪
Please note that once you perform the Default Setting, all data such
as digital channel list, and user configured data are deleted.
▪
After completing the default setting, the installation wizard for digital
channels will appear automatically in a few seconds.
▪
For more information about Default Setting of the analog channels,
refer to p.7.
● System
-
Status: You can view status of IRD and Loader.
-
Signal Detection: You can view the signal strength and signal
quality of the channel that is currently on air.
-
common interface: You can view the current status of the CI
Module (Conditional Access Module).
noTe: The displayed information about a Common Interface may differ depending on Common Interface type.
-
conditional Access: You can check the information of the embedded CAM (Conditional Access Module).
-
Mail Messages: You can receive mail sent by the broadcasting company. When a new mail arrives, the
envelope icon will appear on the screen. Urgent message will be displayed on the screen while you are
watching a programme. Select a mail and press the oK button to read the mail.
:
> DTV Setup
> D T V S e t u p
DT V Setup
Enter
Configuration
Edit Channels
Installation
System
GB-9