Alert Messages; Initialization - Yamaha DZR315-D Reference Manual

Alert Messages

When an error occurs, an alert message will appear on the display.
For more details on each error message and notification, see the
(page 37).
E.g.)

Initialization

You can reset to the default settings for this product in the following two ways.
 Initializing to the default settings by navigating from the HOME
screen and selecting UTILITY → INITIALIZE
(See page 26.)
 Initializing to the default settings when you have forgotten your
PIN code, etc.
Use the following method to reset to the default settings if you are unable to select INI-
TIALIZE on the UTILITY screen because of a forgotten PIN code, etc.
1.
Disconnect all the cables except the power cord.
WARNING
A sudden loud sound might occur when initializing is completed, if an audio
signal is present.
2.
Turn the power switch off.
3.
After the [POWER] indicator turns off, turn the power switch back on.
4.
While pressing and holding the main knob, turn the main knob at least five clicks
in a counter-clockwise direction within two seconds of the [POWER] indicator
light coming on. (Keep pressing and holding the main knob.)
If the procedure is not finished properly in time, the model name logo will appear. In
this case, repeat the procedure again from step 2.
5.
When the [POWER] indicator starts flashing and the screen shown below
appears, release the main knob.
"Message List"
NOTE
To cancel the initialization process at this point, turn the power switch off.
6.
Press the main knob.
This product will be restarted automatically.
7.
Wait until the HOME screen appears.
NOTICE
Turning the power switch off before the HOME screen appears could cause a malfunction.
Panel Operations
12