Canon 2541C001 Operation Manual page 55

(I) Day/Night
Set a capture mode suited to the brightness of the camera installation environment (P. 61).
(J) Switch Area Zoom/Drag to Move
Switch between Area Zoom and Drag to Move functions for dragging in the video display area (P. 58).
(K) Pan/Tilt/Zoom
If you enable this button (make it purple), the pan/tilt/zoom sliders are displayed on the screen to perform
operations.
The pan slider is displayed on the bottom of the screen, the tilt slider on the left edge of the screen, and the
zoom slider on the right edge of the screen.
(L) BLC (Back Light Compensation)
Turns on/off backlight compensation (P. 62).
(M) Home Position
Move the camera angle to the home position (P. 62).
(N) Obtain/Release Camera Control Privileges
Obtain and release the camera control privileges (P. 55).
(6) Event and Input/Output Menu
Use external device output (P. 72).
(7) Snapshot
Displays the still image shown when the button was clicked by opening the snapshot panel (P. 67).
(8) Memory Card Recording
Start and stop video recording to a memory card (P. 68).
(9) Information Display
Information, warning and error messages are displayed (P. 50).
54
HM4x S30 S31