Connecting The Notebook To The Port Replicator - Fujitsu LIFEBOOK U9311A Operating Manual

Connecting the notebook to the Port Replicator

► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
► Connect one end of the supplied cable (USB Type-C) to the USB port with
charging function on the notebook (1).
► Connect the other end of the cable (USB Type-C) to the USB port for data connection
and power supply (USB Type-C) on the port replicator (2).
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.
Fujitsu
1
2
Working with the notebook
43