Top Cover - HP ProBook 4430s Maintenance And Service Manual

6.
Remove the fan (see
7.
Remove the heat sink (see
Remove the processor:
1.
Position the computer upside-down with the front toward you.
2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
3. Lift the processor (2) straight up and remove it.
NOTE:
on the processor slot when you install the processor.
Reverse this procedure to install the processor.

Top cover

Description
For use in model 4330s:
With a fingerprint reader
Without a fingerprint reader
For use in model 4430s:
Fan on page
Heat sink on page
The gold triangle (3) on the processor must be aligned with the triangle (4) embossed
65).
67).
Component replacement procedures
Spare part number
646331-001
646333-001
69