HIKVISION DS-TCP440-DB User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Automobile Accessories
  5. DS-TCP440-DB
  6. User manual

HIKVISION DS-TCP440-DB User Manual

Parking camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Parking Camera
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for HIKVISION DS-TCP440-DB

  • Page 1 Parking Camera User Manual...
  • Page 2 INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
  • Page 3 Parking Camera User Manual PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
  • Page 4 Parking Camera User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 Parking Camera User Manual Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
  • Page 6 Parking Camera User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, Caution could result in equipment damage, data loss, performance degradation, or unexpected results.
  • Page 7 Parking Camera User Manual Safety Instruction Laws and Regulations Use of the product must be in strict compliance with the local laws and regulations. Please shut down the device in prohibited area. Power Supply ● Use of the product must be in strict compliance with the local electrical safety regulations. ●...
  • Page 8 Parking Camera User Manual ● Keep all packaging after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original packaging. Transportation without the original packaging may result in damage to the device and the company shall not take any responsibility.

  • Page 9: Table Of Contents

    Parking Camera User Manual Contents Chapter 1 Introduction ........................1 1.1 Introduction ........................1 1.2 Key Feature ........................1 Chapter 2 Activation ........................2 2.1 Default Information ......................2 2.2 Activate via SADP ......................2 2.3 Activate via Web Browser ....................3 Chapter 3 Login ..........................
  • Page 10 Parking Camera User Manual 6.1.5 Capture Picture Manually ..................18 6.1.6 Record Manually ....................19 6.1.7 Enable Digital Zoom ..................... 19 6.2 Local Configuration ......................19 Chapter 7 Storage ......................... 21 7.1 Set FTP ..........................21 7.2 Set Cloud Storage ......................22 7.3 Set Listening Host ......................
  • Page 11 Parking Camera User Manual 12.4.2 Install Authorized Certificate................42 Chapter 13 Maintenance ......................44 13.1 View Device Information ....................44 13.2 Upgrade ........................44 13.3 Reboot .......................... 45 13.4 Restore Parameters ...................... 45 13.5 Synchronize Time ......................45 13.6 Set DST .......................... 46 13.7 Export Parameters ......................

  • Page 12: Chapter 1 Introduction

    Parking Camera User Manual Chapter 1 Introduction 1.1 Introduction The parking camera (hereinafter referred to as device) is applied in the parking guidance and find my car system to detect whether the parking space is occupied or not and recognize the license plate.

  • Page 13: Chapter 2 Activation

    Before You Start ● Get the SADP software from the supplied disk or the official website (http://www.hikvision.com/), and install it according to the prompts. ● The device and the computer that runs the SADP tool should belong to the same network segment.

  • Page 14: Activate Via Web Browser

    Parking Camera User Manual 4. Click Activate to start activation. Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same network segment as your computer by either modifying the IP address manually or checking Enable DHCP.
  • Page 15 Parking Camera User Manual 5. Go to the network settings interface to modify IP address of the device.

  • Page 16: Chapter 3 Login

    Parking Camera User Manual Chapter 3 Login You can log in to the device via web browser for further operations such as live view and local configuration. Before You Start Connect the device to the network directly, or via a switch or a router. Steps 1.

  • Page 17: Chapter 4 Capture Configuration

    Parking Camera User Manual Chapter 4 Capture Configuration 4.1 Set Capture Parameters 4.1.1 Set Vehicle Feature Parameters Set vehicle feature parameters when you need to detect the passing vehicle features. Steps 1. Go to Configuration → Device Configuration → Capture Parameters → Vehicle Feature. Figure 4-1 Set Vehicle Feature Parameters 2.

  • Page 18: Set Capture Overlay

    Parking Camera User Manual 4.1.3 Set Capture Overlay If you want to overlay information on the captured pictures, set capture overlay. Steps 1. Go to Configuration → Device Configuration → Text Overlay → Single Picture Overlay. 2. Check Capture Picture Overlay. Figure 4-3 Set Capture Overlay 3.

  • Page 19: View Real-Time Picture

    Parking Camera User Manual 5. Set the overlay information. Type You can edit the type. Overlay Information For some information type, you can edit the detailed information. Overlay Position If you select Overlay on the Picture, you can check it. Then the current information will be displayed from a new line.
  • Page 20 Parking Camera User Manual Figure 4-4 Real-Time Picture 3. You can do the following operations on this interface. – Select the arming mode. Level 1 Arming can only connect one client or web. The uploaded pictures will not be stored in the storage card. The pictures in the storage card will be uploaded to the level 1 arming.

  • Page 21: Chapter 5 Parking Space Detection

    Parking Camera User Manual Chapter 5 Parking Space Detection 5.1 Set Detection Rules To detect the parking spaces, you should enable the smart analysis and set the parameters of parking spaces. Steps 1. Go to Configuration → Device Configuration → Smart Analysis → Analytics Parameters Figure 5-1 Smart Analysis 2.

  • Page 22: Set Parking Space Indicator

    Parking Camera User Manual According to the number of spaces you set, the quadrilateral(s) of the parking space area(s) will appear in the image. 4. Click the tab of the parking space No. to set the parameters. 1) Enter Parking Space No. 2) Click Yes if the parking space is a special parking space.
  • Page 23 Parking Camera User Manual Note If the self-test fails, check the cable connection. Internal & External Indicator The internal and external indicators work at the same time. You can respectively set the indicator to inform the status of each parking space. 3.

  • Page 24: View Parking Space Status

    Parking Camera User Manual 5.3 View Parking Space Status You can view the occupancy status, license plate number, indicator color, etc. of the detected parking spaces. Steps 1. Go to Configuration → Device Configuration → Parking Space Indicator → Parking Space Status.

  • Page 25: Internal And External Indicator Application

    Parking Camera User Manual Figure 5-4 Internal Indicator Application Figure 5-5 External Indicator Application 5.4.2 Internal and External Indicator Application Note Here we take example of the scene in which a device monitors three parking spaces. In internal and external indicator application, the internal and external indicators work at the same time.

  • Page 26: Alternate Indicator Control Application

    Parking Camera User Manual and the external indicator 2 of parking camera B, and detects the status of the parking spaces B1 to B3. The parking camera B controls the internal indicator A, the external indicator 1 of parking camera A, and the external indicator 1 of parking camera B, and detects the status of the parking spaces A1 to A3, as shown below.

  • Page 27: Special Parking Space Application

    Parking Camera User Manual display the color of unoccupied status when any of the three spaces is free. The indicator A/B will display the color of over line when a parked vehicle occupies two spaces. Figure 5-7 Alternate Indicator Control Application 5.4.4 Special Parking Space Application Note Here we take example of the scene in which a device monitors three parking spaces.
  • Page 28 Parking Camera User Manual Figure 5-8 Special Parking Space Application...

  • Page 29: Chapter 6 Live View And Local Configuration

    Parking Camera User Manual Chapter 6 Live View and Local Configuration 6.1 Live View 6.1.1 Start/Stop Live View Click to start live view. Click to stop live view. 6.1.2 Select Image Display Mode Click to display the image in 4:3/16:9/original/self-adaptive display mode. 6.1.3 Select Stream Type Click to select the stream type.

  • Page 30: Record Manually

    Parking Camera User Manual 6.1.6 Record Manually You can record videos manually on the live view image and save them to the computer. Steps 1. Click to start live view. 2. Click to start recording. 3. Click to stop recording. 4.
  • Page 31 Parking Camera User Manual Select the network transmission protocol according to the actual needs. Ensures complete delivery of streaming data and better video quality, yet the real-time transmission will be affected. Provides real-time audio and video streams. Live View Performance Real-Time The video is real-time, but the video fluency may be affected.

  • Page 32: Chapter 7 Storage

    Parking Camera User Manual Chapter 7 Storage 7.1 Set FTP Set FTP parameters if you want to upload the captured pictures to the FTP server. Before You Start Set the FTP server, and ensure the device can communicate normally with the server. Steps 1.

  • Page 33: Set Cloud Storage

    Parking Camera User Manual 7.2 Set Cloud Storage Cloud storage is a kind of network storage. It can be used as the extended storage to save the captured pictures. Before You Start ● Arrange the cloud storage server. ● You have enabled level 1 arm in Live View → Live Traffic Statistics. Steps 1.
  • Page 34 Parking Camera User Manual Figure 7-3 Set Listening Host 2. Set ANPR IP Address/Domain and ANPR Port if you need to upload the alarm information. 3. Set Listening Host IP and Listening Host Port No., and check Enable Uploading Picture while Listening if you need to upload pictures.

  • Page 35: Chapter 8 Encoding And Display

    Parking Camera User Manual Chapter 8 Encoding and Display 8.1 Set Video Encoding Parameters Set video encoding parameters to adjust the live view and recording effect. ● When the network signal is good and the speed is fast, you can set high resolution and bitrate to raise the image quality.

  • Page 36: Set Image Parameters

    Parking Camera User Manual Select the bitrate type to constant or variable. Video Quality When bitrate type is variable, 6 levels of video quality are selectable. The higher the video quality is, the higher requirements of the network bandwidth. Encoding Complexity Under the same bitrate, the higher the encoding complexity is, the higher the image quality is, and the higher the requirement of the network bandwidth is.
  • Page 37 Parking Camera User Manual Figure 8-1 Set General Parameters Figure 8-2 Set Video Image Parameters 2. Adjust the parameters. Saturation It refers to the colorfulness of the image color. Sharpness It refers to the edge contrast of the image. White Balance It is the white rendition function of the device used to adjust the color temperature according to the environment.
  • Page 38 Parking Camera User Manual Set WDR Level. The higher the level is, the higher the WDR strength is. Time Enable WDR according to the time. Brightness Set Light Threshold. When the brightness reaches the threshold, WDR will be enabled. If you focus on an object against strong backlight, the object will be too dark to be seen clearly.

  • Page 39: Set Roi

    Parking Camera User Manual too high, trailing may appear. 2D DNR The higher the 2D DNR Level is, the stronger the noise will be reduced. But if it is too high, the image may become fuzzy. 8.3 Set ROI ROI (Region of Interest) encoding helps to assign more encoding resources to the region of interest, thus to increase the quality of the ROI whereas the background information is less focused.

  • Page 40: Set Osd

    Parking Camera User Manual 1) Check Enable. 2) Select Area Code. 3) Click Draw Area. 4) Drag the mouse on the live view image to draw the fixed area. 5) Select the fixed area that needs to be adjusted and drag the mouse to adjust its position. 6) Click Stop Drawing.
  • Page 41 Parking Camera User Manual 5. Drag the red frames on the live view image to adjust the OSD positions. 6. Click Save. Result The set OSD will be displayed in live view image and recorded videos.

  • Page 42: Chapter 9 Network Configuration

    Parking Camera User Manual Chapter 9 Network Configuration 9.1 Set IP Address IP address must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other.

  • Page 43: Connect To Ehome Platform

    Parking Camera User Manual Manual You can set the device IPv4 parameters manually. Enter IPv4 Address, IPv4 Subnet Mask, and IPv4 Default Gateway. IPv6 Three IPv6 modes are available. Route Announcement The IPv6 address is generated by combining the route announcement and the device Mac address.

  • Page 44: Set Ddns

    Parking Camera User Manual Steps 1. Go to Configuration → Device Configuration → System Configuration → EHOME. Figure 9-2 Connect to EHome Platform 2. Check Enable Protocol. 3. Select Address Type. Domain Name When the server is in extranet, and the IP address is dynamic, you can select it. When the server IP address is static, you can select it.

  • Page 45: Set Port

    Parking Camera User Manual Steps 1. Go to Configuration → Device Configuration → System Configuration → DDNS. Figure 9-3 Set DDNS 2. Check Enable DDNS. 3. Enter the server address and other information. 4. Click Save. 5. Access the device. By Browsers Enter the domain name in the browser address bar to access the device.

  • Page 46: Set Bluetooth

    Parking Camera User Manual It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.168.1.64:81 in the browser for login. RTSP Port It refers to the port of real-time streaming protocol. SDK Port It refers to the port through which the client adds the device.
  • Page 47 Parking Camera User Manual Note Enter the hex characters (0 to F) according to the corresponding standard of Bluetooth for the parking lot ID.

  • Page 48: Chapter 10 Serial Port Configuration

    Parking Camera User Manual Chapter 10 Serial Port Configuration 10.1 Set RS-485 Set RS-485 parameters if the device has been connected to a vehicle detector or other RS-485 devices. Before You Start The corresponding device has been connected via the RS-485 serial port. Steps 1.
  • Page 49 Parking Camera User Manual Steps 1. Go to Configuration → Device Configuration → System Configuration → Serial Port Parameters. 2. Click Advanced Settings. Figure 10-2 Set RS-232 3. Set Baud Rate, Data Bit, Stop Bit, etc. Note The parameters should be same with those of the connected device. 4.

  • Page 50: Chapter 11 Alarm Configuration

    Parking Camera User Manual Chapter 11 Alarm Configuration This section explains how to set the device to respond to alarm events, including motion detection and exceptions. These events can trigger the linkage methods, such as notifying the security center. 11.1 Set Motion Detection Motion detection detects the moving objects in the set security area, and a series of actions can be taken when the alarm is triggered.

  • Page 51: Set Exception Alarm

    Parking Camera User Manual 4) Optional: If you want to copy the arming schedule to other days, check the day(s) and click Copy. 5) Click OK. Note The time of each period cannot be overlapped. Up to four periods can be set for each day. Figure 11-2 Set Arming Schedule 5.

  • Page 52: Chapter 12 Safety Management

    Parking Camera User Manual Chapter 12 Safety Management 12.1 Manage User The administrator can add, modify, or delete other accounts, and grant different permissions to different user levels. Steps 1. Go to Configuration → Device Configuration → User Management. 2. Add a user. 1) Click Add.

  • Page 53: Enable User Lock

    Parking Camera User Manual 12.2 Enable User Lock To raise the data security, you are recommended to lock the current IP address. Steps 1. Go to Configuration → Device Configuration → System Configuration → Service. 2. Check Enable User Lock. 3.
  • Page 54 Parking Camera User Manual via HTTPS protocol to ensure the data transmission security. Steps 1. Go to Configuration → Device Configuration → System Configuration → HTTPS. 2. Select Create certificate request first and continue the installation. 3. Click Create. 4. Follow the prompt to enter Country, Hostname/IP, Validity, and other parameters. 5.

  • Page 55: Chapter 13 Maintenance

    Parking Camera User Manual Chapter 13 Maintenance 13.1 View Device Information Basic Information and Algorithms Library Version Go to Configuration → Device Configuration → System Configuration → Device Information to view the basic information and algorithms library version of the device. You can edit Device Name and Device No.

  • Page 56: Reboot

    Parking Camera User Manual 13.3 Reboot When the device needs to be rebooted, reboot it via the software instead of cutting off the power directly. Steps 1. Go to Configuration → Device Configuration → System Maintenance → Reboot. 2. Click Reboot. 3.

  • Page 57: Set Dst

    Parking Camera User Manual 4. Click Save. 13.6 Set DST If the region where the device is located adopts Daylight Saving Time (DST), you can set this function. Steps 1. Go to Configuration → Device Configuration → System Configuration → DST. 2.

  • Page 58: Export Debug File

    Parking Camera User Manual 1. Go to Configuration → Device Configuration → System Maintenance → Import Configuration File. 2. Select Importing Method. Note If you select Import Part, check the parameters to be imported. 3. Click Browse to select the configuration file. 4.
  • Page 59 UD20012B...

This manual is also suitable for:

Ds-tcp440-bhDs-tcp440-bDs-tcp140-bDs-tcp440-dbh

Table of Contents