LG 65NANO80UNA Owner's Manual

LG 65NANO80UNA Owner's Manual

Hide thumbs Also See for 65NANO80UNA:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

OWNER'S MANUAL
Safety and Reference
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set
and retain it for future reference.
49NANO80UNA
55NANO80UNA
65NANO80UNA
49NANO81ANA
49NANO81UNA
55NANO81ANA
55NANO81UNA
65NANO81ANA
65NANO81UNA
*MFL71520733*
(2001-REV00)
49NANO85UNA
55NANO85UNA
65NANO85UNA
75NANO85UNA
49NANO86UNA
55NANO86UNA
65NANO86UNA
55NANO90UNA
65NANO90UNA
75NANO90UNA
86NANO90UNA
55NANO91ANA
55NANO91UNA
65NANO91ANA
75NANO91ANA
86NANO91ANA
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
www.lg.com
Printed in Korea

Advertisement

Table of Contents
loading

Summary of Contents for LG 65NANO80UNA

  • Page 1 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 49NANO80UNA 49NANO85UNA 55NANO90UNA 55NANO80UNA 55NANO85UNA 65NANO90UNA 65NANO80UNA 65NANO85UNA...
  • Page 2: Important Safety Instruction

    By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration agreement (including details on the procedure for resolving disputes) is available at www.lg.com/us/arbitration (USA) or www.lg.com/ca_en/arbitration...
  • Page 3 Warning! Safety • Ventilation - Install your TV where there is proper ventilation. Do not install in instructions a confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or other materials while unit is plugged in.
  • Page 4 • Use only an authorized attachments / accessories approved by industrial), abrasive, thinner, benzene, alcohol etc., which can LG Electronics. Otherwise, this may result in fire, electric shock, damage the product and/or its panel. Otherwise, this may result malfunction, or product damage.
  • Page 5: Optional Extras

    Preparing Optional Extras Optional extras can be changed or modified for quality improvement • When the TV is turned on for the first time after being shipped without any notification. Contact your dealer for buying these items. from the factory, initialization of the TV may take approximately These devices work only with certain models.
  • Page 6: Wall Mounting Bracket

    Lifting and moving the TV Wall Mounting Bracket (Depending upon model) When moving or lifting the TV, read the following to prevent the TV Make sure to use screws and wall mount bracket that meet the VESA from being scratched or damaged and for safe transportation regardless standard.
  • Page 7: Mounting On A Table

    Securing TV to the Wall • Avoid touching the screen at all times, as this may result in damage to the screen. • Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.
  • Page 8: Mounting To The Wall

    Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is...
  • Page 9 Connections • → → [Picture] → [Additional Settings] → [HDMI Ultra HD Deep Color] (Only NANO80*, NANO81*) You can connect various external devices to the TV. For more - On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) information on external device’s connection, refer to the manual - Off: Support 4K @ 50/60 Hz (4:2:0) provided with each device.
  • Page 10: Using Button

    To obtain the RS-232C external control setup information, please You can simply operate the TV functions, using the button. visit www.lg.com. Download and read the manual, (Depending upon model). • Do not drop the product or let it fall over when connecting external devices.
  • Page 11 Using Magic Remote To use the button, press and hold for more than 1 second. Control (POWER) Turns the TV on or off. (STB POWER) You can turn your set-top box on or off by adding the settop box to the universal remote control for your TV. (Depending upon model) Number buttons Enters numbers.
  • Page 12: Registering Magic Remote Control

    User Guide Registering Magic Remote Control For more information about this TV, read the USER GUIDE embedded in How to register the Magic Remote Control the product. (Depending upon model) • To open the USER GUIDE → → [Support] → [User To use the Magic Remote, first pair it with your TV.
  • Page 13 Abnormal Display • If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
  • Page 14: Specifications

    Specifications Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.). •...
  • Page 15 (Except for NANO80*, NANO81*) Wireless module(LGSBWAC92)Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency range Output Power (Max.) 2400 to 2483.5 MHz 18 dBm 5150 to 5725 MHz 18 dBm 5725 to 5850 MHz 18 dBm Bluetooth Frequency range Output power(Max.) 2400 to 2483.5 MHz 8 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency.
  • Page 16 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
  • Page 17 NOTE TO CABLE/TV INSTALLER (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
  • Page 18 WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television set.
  • Page 20 Supplier`s Declaration of Conformity Trade Name Responsible Party LG Electronics USA, Inc. LG Customer Information Center Address 1000 Sylvan Ave Englewood Cliffs, NJ 07632 For inquires or comments, visit www.lg.com or call; Telephone (201)266-2215 1-888-542-2623 CANADA 1-800-243-0000 USA, Consumer User...
  • Page 21 Sécurité et références TÉLÉVISEUR À DEL* * La mention « Téléviseur à DEL de LG » s’applique à l’ é cran ACL avec rétroéclairage à DEL. Veuillez lire ce manuel attentivement avant d’utiliser l’appareil et conservez-le pour pouvoir vous y reporter ultérieurement.
  • Page 22: Directives De Sécurité Importantes

    à l’humidité, si l’appareil ne fonctionne pas normalement ou s’il est tombé. En utilisant ce produit, vous acceptez que tout différend entre vous et LG en lien avec ce produit ou en découlant de quelque manière que ce soit (y compris, sans toutefois s’y limiter, les différends concernant la garantie) se règle exclusivement par arbitrage exécutoire au cas par cas.
  • Page 23 Avertissement! Directives • Aération - Installez votre téléviseur à un endroit où l’aération est suffisante. de sécurité Ne l’installez pas dans un espace restreint comme une bibliothèque. - N’installez pas le produit sur un tapis ou un coussin. - N’ o bstruez pas les ouvertures de l’appareil et ne le recouvrez pas avec du tissu ou tout autre matériau lorsqu’il est branché.
  • Page 24 • Ne tentez en aucun cas de réaliser des modifications sur cet nettoyez pas votre téléviseur à l’aide de produits chimiques appareil sans avoir obtenu l’autorisation écrite de LG Electronics qui peuvent l’ e ndommager ou endommager son panneau, au préalable. Cela pourrait entraîner des risques d’incendie ou de y compris du nettoyant pour vitres, tout type de purificateur décharge électrique.
  • Page 25: Articles Supplémentaires En Option

    Préparation Articles supplémentaires en option • Lorsque le téléviseur est allumé pour la première fois après sa sortie de l’usine, son initialisation peut prendre environ une minute. Des articles supplémentaires en option peuvent être remplacés • L’image présentée peut ne pas correspondre à votre téléviseur. ou modifiés à...
  • Page 26: Soulèvement Et Déplacement Du Téléviseur

    Soulèvement et Support de fixation murale déplacement du téléviseur (Selon le modèle) Assurez-vous d’utiliser des vis et un support de fixation murale conformes à la norme VESA. Les dimensions standards des trousses de Lorsque vous désirez déplacer ou soulever le téléviseur, lisez tout fixation murale sont indiquées dans le tableau suivant.
  • Page 27: Fixation Du Téléviseur Au Mur

    Fixation du téléviseur au mur • Évitez de toucher à l’ é cran, car cela pourrait l’ e ndommager. • Ne déposez pas le produit sur le plancher si la partie avant (l’ é cran) n’ e st pas posée sur une surface coussinée. Cela pourrait endommager l’...
  • Page 28: Fixation Murale

    (Selon le modèle) LG. Le support de fixation murale de LG est facile à ajuster, et les câbles • N’utilisez pas un objet pointu lorsque vous retirez le s’y branchent aisément. Si vous n’utilisez pas un support de fixation couvercle du câble.
  • Page 29 Connexions • → → [Image] → [Réglages supplémentaires] → [HDMI ULTRA HD Deep Color] (Uniquement pour le modèle NANO80*, NANO81*) Vous pouvez connecter différents appareils externes sur le téléviseur. - Activé : Prise en charge du format 4K à 50/60 Hz (4:4:4, 4:2:2 Pour plus d’information sur la connectivité...
  • Page 30: Utilisation Du Bouton

    Vous pouvez simplement utiliser les fonctions du téléviseur à l’aide du bouton. Pour obtenir les instructions de configuration de la commande externe RS-232C, rendez-vous au www.lg.com. Téléchargez et lisez le manuel. (Selon le modèle) • Ne laissez pas le produit tomber ou basculer lorsque vous connectez des dispositifs externes.
  • Page 31: Utilisation De La Télécommande Magic

    Utilisation de la Pour utiliser le bouton, maintenez-le enfoncé pendant plus d’une seconde. télécommande Magic (MARCHE/ARRÊT) Allume ou éteint le téléviseur. (MARCHE/ARRÊT DU BOÎTIER DÉCODEUR) Vous pouvez (Selon le modèle) allumer ou éteindre votre boîtier décodeur en l’ajoutant à la Les descriptions qui figurent dans le présent manuel font référence aux télécommande universelle de votre téléviseur.
  • Page 32: Dépannage

    Manuel d’utilisation Enregistrement de la télécommande Magic Pour de plus amples renseignements sur ce téléviseur, lisez le MANUEL D’UTILISATION fourni avec le produit. (Selon le modèle) Enregistrement de la télécommande Magic • Pour ouvrir le MANUEL D’UTILISATION → → [Assistance] → [Guide d’utilisation] Avant de pouvoir utiliser la télécommande Magic, vous devez l’associer au téléviseur.
  • Page 33 Affichage anormal • Si le téléviseur est froid au toucher, il peut produire un léger scintillement lors de la mise sous tension. Cela est normal; le téléviseur n’ e st pas défectueux. Pendant quelques minutes, des défauts de points peuvent être visibles à l’ é cran, apparaissant comme de petites taches rouges, vertes ou bleues.
  • Page 34: Caractéristiques Techniques

    Caractéristiques techniques Les caractéristiques techniques sont susceptibles d’ ê tre modifiées sans préavis en raison de la mise à niveau des fonctions du produit. La consommation d’ é nergie annuelle estimée indiquée sur l’ é tiquette FTC est mesurée conformément aux procédures de test pour les téléviseurs (États-Unis seulement).
  • Page 35 (Sauf pour les modèles NANO80*, NANO81*) Caractéristiques du module sans fil (LGSBWAC92) Réseau local sans fil (IEEE 802.11a/b/g/n/ac) Gamme de fréquences Puissance de sortie (maximale) 2 400 à 2 483,5 MHz 18 dBm 5 150 à 5 725 MHz 18 dBm 5 725 à 5 850 MHz 18 dBm Bluetooth Gamme de fréquences...
  • Page 36 être téléchargés. LG Electronics mettra également à votre disposition le code source libre sur CD-ROM pour un prix couvrant le coût de la distribution (coût du support, de l’ e xpédition et de la manutention) sur simple demande par courriel à...
  • Page 37 REMARQUE À L’INTENTION DES INSTALLATEURS DE RÉSEAUX CÂBLÉS (Pour les États-Unis et le Canada) Cette remarque a pour but d’attirer l’attention des installateurs de réseaux câblés sur l’article 820-40 du Code national de l’ é lectricité (NEC). Ce code donne des lignes directrices concernant la mise à la terre appropriée de tels réseaux et, en particulier, il précise que le câble doit être relié...
  • Page 38 AVERTISSEMENT! Ne placez jamais un téléviseur sur une surface instable. Le téléviseur pourrait tomber et causer des blessures importantes, pouvant aller jusqu’à la mort. De nombreuses blessures, en particulier chez les enfants, peuvent être évitées en prenant des précautions simples comme : •...
  • Page 40 Partie responsable LG Electronics USA, Inc. Adresse 1000, av. Sylvan, Englewood Cliffs, NJ 07632 Service à la clientèle LG Téléphone (201)266-2215 Pour toute question ou commentaire, visitez le www.lg.com ou appelez : Les numéros de modèle et de série du produit sont situés...
  • Page 41: External Control Device Setup

    OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com P/NO : MFL71445401 (1901-REV00)
  • Page 42: Key Codes

    KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Page 43 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial(RS-232C) RS-232C IN converter which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 44 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
  • Page 45 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
  • Page 46 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 47 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Page 48 EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ► To adjust the screen Color(Colour). ► To adjust treble. You can also adjust colour in the PICTURE menu. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
  • Page 49 EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) * Analog Antenna/Cable ► Adjust EQ of the set. [Data 00][Data 01] Channel Data Transmission [j][v][ ][Set ID][ ][Data][Cr] Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV)
  • Page 50 EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable 2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 : Physical Channel Number Data 00 = Don’t know Physical = 00 - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) Data 01 &...
  • Page 51 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) 2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 (Main Picture Input) Data 00 = Don’t know Physical = 00 ► To select input source for main picture. Data 01 &...
  • Page 52 EXTERNAL CONTROL DEVICE SETUP * [Data 02], [Data 03] functions depend on model 3) When [Data 00] is 06, 07 and signal. 00 : Off 01 : On * If [Data 00] is 00 (3D On), [Data 03] has no meaning.
  • Page 54: Manuel D'utilisation

    MANUEL D’UTILISATION CONFIGURATION DE L’APPAREIL DE COMMANDE EXTERNE Veuillez lire ce manuel attentivement avant d’utiliser votre appareil et conservez-le pour pouvoir vous y reporter ultérieurement. www.lg.com P/NO : MFL71445403 (1903-REV00)
  • Page 55 CODES CLÉS CODES CLÉS • Cette fonction n’est pas offerte sur tous les modèles. Code Code Fonction Remarque Fonction Remarque (hexa) (hexa) CH +, PR + Touche R/C Liste Touche R/C CH -, PR - Touche R/C Sortie Touche R/C Volume + Touche R/C PIP (AD)
  • Page 56 (TV) (PC) • Les téléviseurs LG sont compatibles avec l’adaptateur à puce USB vers Série (RS-232C) (réf. fabricant : 0 x 0557, réf. produit : 0 x 2008), qui n’est ni fabriqué ni fourni par LG. RS-232C IN (CONTROL & SERVICE) •...
  • Page 57 (TV) (TV) (PC) (PC) CONFIGURATION DE L'APPAREIL DE COMMANDE EXTERNE RS-232C IN RS-232C IN Type sortie casque (CONTROL & SERVICE) (CONTROL & SERVICE) (PC) (TV) (PC) (TV) • Vous devez disposer du câble de type sortie casque/RS-232 pour établir la connexion entre votre ordinateur et le téléviseur, comme il est indiqué...
  • Page 58 CONFIGURATION DE L'APPAREIL DE COMMANDE EXTERNE Paramètres de communication • Débit en baud : 9 600 b/s (UART) • Bit d’arrêt : 1 bit • Longueur des données : 8 bits • Code de communication : code ASCII • Parité : aucune •...
  • Page 59 CONFIGURATION DE L'APPAREIL DE COMMANDE EXTERNE Protocole de transmission/réception Transmission [Commande1][Commande2][ ][Identité télé][ ][Données][Cr] [Commande 1] : Première commande du téléviseur (j, k, m ou x) [Commande 2] : Deuxième commande du téléviseur [Identité télé] : Vous pouvez choisir, à l’aide de cette fonction, le numéro d’identité du moniteur dans le menu Options.
  • Page 60 CONFIGURATION DE L'APPAREIL DE COMMANDE EXTERNE *Les commandes peuvent fonctionner de façon différente en fonction des modèles et du signal. 01. Mise sous tension (Commande : k a) Accusé de réception [d][ ][Identité télé][ ][OK/NG[Données][x] ► Pour *activer/désactiver l’appareil. * Si seule la sourdine vidéo est activée, le téléviseur montrera l’affichage à...
  • Page 61 CONFIGURATION DE L'APPAREIL DE COMMANDE EXTERNE 08. Couleur (Commande : k i) 13. Aigus (Commande : k r) ► Pour ajuster la couleur de l’écran. ► Pour régler les aigus. Vous pouvez également régler la couleur dans le Vous pouvez aussi régler les aigus dans le menu menu IMAGE.
  • Page 62 CONFIGURATION DE L'APPAREIL DE COMMANDE EXTERNE 18. Égalisateur (Commande : j v) * Antenne/câble analogique ► Pour ajuster l’égalisateur de l’écran. [Données 00][Données 01] Données de chaîne Données 00 : Données de chaîne octet haut Transmission [j][v][ ][Identité télé][ ][Données][Cr] Données 01 : Données de chaîne octet bas - 00 00 à...
  • Page 63 CONFIGURATION DE L'APPAREIL DE COMMANDE EXTERNE * Antenne/câble analogique 2. Syntonisez la chaîne numérique par antenne (ATSC) 30-3. Données 00 : Numéro de chaîne physique Identité télé = Tout = 00 - Antenne (ATV) : 02 à 45 (décimale : 2 à 69) Données 00 = Physique inconnu = 00 - Câble (CATV) : 01, 0E à...
  • Page 64 11 11 CONFIGURATION DE L'APPAREIL DE COMMANDE EXTERNE 24. Sélection d’entrée (Commande : x b) 2. Syntonisez la chaîne 30 du satellite de radiodiffusion (ISDB-BS). (Entrée d’image principale) Identité télé = Tout = 00 ► Pour sélectionner la source d’entrée pour l’image Données 00 = Physique inconnu = 00 principale.
  • Page 65 CONFIGURATION DE L'APPAREIL DE COMMANDE EXTERNE * Les fonctions [Données 02] et [Données 03] peuvent 3) Si [Données 00] = 06, 07 varier en fonction du modèle et du signal. 00 : Arrêt 01 : Marche * Si [Données 00] = 00 (3D activée), [Données 03] est ignorée.

Table of Contents