Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siemens S189YCX01E
Summary of Contents for Siemens S189YCX01E
- Page 1 Dishwasher [en] User manual S189YCX01E...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Features......... 22 General information...... 4 Top basket ........ 22 Intended use........ 4 Bottom basket ........ 23 Restriction on user group.... 4 Cutlery drawer ........ 23 Safe installation ........ 4 Etagere ........... 24 Safe use ........... 6 Folding prongs ....... 24 Damaged appliance ...... 8 Basket heights........ 25 Risk to children ........ 8 Before using for the first time .. - Page 3 Setting timer programming .... 34 Transporting the appliance .... 59 Starting the programme .... 35 Disposing of old appliance .... 59 Interrupting programme .... 35 Customer Service...... 59 Terminate programme.... 35 Product number (E-Nr.), produc- Display programme information.. 35 tion number (FD) and consecut- Switching off appliance .... 35 ive numbering (Z-Nr.) ..... 60 AQUA-STOP guarantee .... 60 Basic settings........
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury. ▶ If built-under or integrable appliances are not in a cavity so that one side is accessible, the hinge area must be covered at the side. - Page 7 Safety en WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury. ▶ Only open the appliance door to load or unload tableware in order to prevent accidents, e.g. through tripping. ▶ Do not sit or stand on the appliance door when open. ¡...
-
Page 8: Damaged Appliance
en Safety Damaged appliance Follow the safety instructions if the appliance is damaged. WARNING ‒ Risk of electric shock! ¡ If the appliance or the power cord is damaged, this is danger- ous. ▶ Never operate a damaged appliance. ▶ Never operate an appliance with a cracked or fractured sur- face. -
Page 9: Safety Systems
Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close. -
Page 10: Preventing Material Damage
en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡... -
Page 11: Childproof Lock
Childproof lock en So as not to scratch the finish ▶ Environmental protection and saving energy Environmental protection on the appliance, do not use sponges with a rough surface or and saving energy abrasive cleaning agents. To prevent corrosion, do not use Environmental protection and saving energy ▶... -
Page 12: Aquasensor
en Environmental protection and saving energy During the drying phase moisture Sensor setting Description from the interior of the dishwasher is Standard Optimum setting for a stored in the mineral and heat energy mixed load and heavily is released. The heat energy is blown soiled tableware. -
Page 13: Installation And Connection
Installation and connection en Check the Scope of supply and Installation and connection Installation and connec- the condition of the appliance. tion Consult the installation instructions for the installation dimensions re- Installation and connection quired. Scope of supply Make the appliance level using the height-adjustable feet. -
Page 14: Drinking Water Connection
en Installation and connection The connection data for the appli- Drinking water connection ance can be found on the rating Connect your appliance to a drinking plate. water connection. Check that the mains plug is inser- ted properly. Installing the drinking water connection Note ¡... -
Page 15: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 60. -
Page 16: Controls
en Familiarising yourself with your appliance "Detergent" → Page 29 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 23 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 25 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 17 Familiarising yourself with your appliance en 3 4 5 6 7 8 "Switching on the appliance" → Page 34 ON/OFF button and reset button "Switching off the appliance" → Page 35 "Terminating the programme" → Page 35 "Programmes" → Page 19 Programme buttons Info button If you press , the display shows information about selected programmes, basic settings and additional functions.
- Page 18 en Familiarising yourself with your appliance buttons You can use these buttons to scroll between the basic settings. → "Changing basic settings", Page 38 "Opening the appliance door" → Page 34 Door opener Depending on the appliance specifications...
-
Page 19: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- ning time will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... - Page 20 en Programmes Programme Programme sequence Additional func- tions Tableware: Reduced noise: → "Additional ¡ Cleaning mixed table- ¡ Pre-Rinse Silence 50° ware and cutlery. functions", ¡ Cleaning 50 °C Level of soiling: Page 21 ¡ Intermediate rinse ¡ Removing common ¡ Final rinse 35 °C household food remnants ¡...
-
Page 21: Information For Test Institutes
Additional functions en Tip: To reset the programme, either Information for test institutes use the Home Connect app or reset Test institutes are provided with in- your appliance back to the factory formation for comparability tests, e.g. settings. according to EN60436. → "Overview of basic settings", These are the conditions for conduct- Page 36 ing the tests, however they are not... -
Page 22: Features
en Features Additional func- Features Features tion ¡ To ensure a higher hy- You can find an overview of the pos- Features giene status for the ap- sible features of your appliance and Extra Hygiene pliance and tableware, how to use them here. the temperature is These features depend on the model raised and maintained... -
Page 23: Bottom Basket
Features en Press in the levers on the right and Bottom basket left on the outside of the basket. Arrange pans and plates in the bot- tom basket. The basket can then slip down slightly. Raise or lower the basket evenly to Large plates up to a diameter of the right level. -
Page 24: Etagere
en Features Arrange cutlery with the points and Folding down prongs sharp edges downwards. If you do not need the prongs, fold them down. Etagere Push the lever forwards and fold Use the cutlery shelf and space un- down the prongs ... -
Page 25: Basket Heights
Before using for the first time en Basket heights Set the baskets at the right height. Appliance height 81.5 cm with cutlery drawer Setting Top basket Bottom basket 1 max. ø 16 cm 31 cm 2 max. ø 18.5 cm 27.5 cm 3 max. -
Page 26: Overview Of Water Hardness Settings
en Water softening system To avoid damage to the appliance, water with a hardness above 9 °E must be softened. Overview of water hardness settings You can find an overview of the water hardness values that can be selected here. You can find out how hard your water is from your local water company or by using a water hardness tester. -
Page 27: Switching Off The Water Softening System
Water softening system en ATTENTION! Switching off the water ¡ Detergent may damage the water softening system softening system. Only fill the dispenser of the wa- If you find the special salt refill indic- ▶ ter softening system with special ator irritating, e.g. when using com- dishwasher salt. -
Page 28: Regeneration Of The Water Softening System
en Rinse aid system Regeneration of the water Rinse aid system Rinse aid system softening system You can use the rinse aid system Rinse aid system In order to obtain fault-free function of and rinse aid to get tableware and the water softening system, the appli- glasses rinsed perfectly without ance performs regeneration of the marks. -
Page 29: Setting The Amount Of Rinse Aid
Detergent en Spilled rinse aid can cause ex- Press repeatedly until the display cessive frothing during the wash shows "Rinse aid dispenser". cycle. Press repeatedly until the Close the lid of the dispenser for display shows 0. rinse aid. To save the settings, press a The lid clicks into position. -
Page 30: Unsuitable Detergents
en Detergent Combined detergent Detergent Description Besides conventional separate deter- Powder deter- Powder detergent is re- gents, a number of products are gent commended for shorter available with additional functions. "Programmes" → Page 19. These products contain not only de- The dosage can be adjus- tergent but also rinse aid and salt re- ted to the level of soiling. -
Page 31: Adding Detergent
Detergent en pletely dispense with certain sub- Add the detergent to the dry deter- stances. The cleaning effect may gent dispenser. be restricted here. ¡ Set the rinse aid and the water 50 ml softening system to the separate 25 ml detergent or combined detergent 15 ml in use. -
Page 32: Tableware
en Tableware Close the lid of the detergent dis- Damage to glass and table- penser. ware Avoid damage to glass and table- ware. Cause Recommendation The following table- Only put tableware in ware is not dish- the dishwasher if it is washer-safe: marked as dish- ¡... -
Page 33: Arrange Tableware
Tableware en To save resources, do not pre- Cause Recommendation rinse tableware under running wa- The water temperat- Select a programme ter. ure of the programme with lower temperat- Observe the following when arran- is too high. ures. ging tableware: After the programme –... -
Page 34: Removing Tableware
en Basic operation cient programme for the combina- Removing tableware tion of energy/water consumption for this type of tableware and evid- WARNING ences conformity with the EU Eco- Risk of injury! design Directive. Hot tableware can cause burns to the If you do not perform any actions skin. -
Page 35: Starting The Programme
Basic operation en 3h 25min) or "Finish at" (e.g. Press to resume the pro- 15:20 hours). You can change this gramme. setting in the "Basic settings" → Page 36. Terminate programme To activate timer programming, To end a programme early or to press . switch from a programme that has Note: To deactivate timer program- already started, you will need to can-... -
Page 36: Basic Settings
en Basic settings Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Selection Description Time setting 00:00 - 24:00 Set the current time. - Page 37 Basic settings en Basic setting Selection Description Eco forecast Switch EcoCheck on or off. When selecting the programme, the average wa- ter consumption and energy consumption is briefly shown on the display. Emotion Light Switch the interior lighting of the appliance on or On via main switch off.
-
Page 38: Changing Basic Settings
en Home Connect Basic setting Selection Description Greeting Switch display of the brand name logo on or off when the appliance is switched on. Factory setting Reset Restore changed settings to the factory settings. The settings for initial start-up must be con- figured. -
Page 39: Home Connect Quick Start
Home Connect en Home Connect quick start Home Connect settings Connect your appliance to a mobile Adapt Home Connect to your needs. device quickly and easily. You can find the Home Connect set- tings in the basic settings for your ap- Installing app pliance. Which settings the display shows will depend on whether Install the Home Connect app on Home Connect has been set up and... -
Page 40: Remote Diagnostics
en Cleaning and servicing This initial registration prepares the Remote Diagnostics Home Connect functions for use and Customer Service can use Remote is only required when you want to Diagnostics to access your appliance use the Home Connect functions for if you contact them, have your appli- the first time. -
Page 41: Tips On Appliance Care
Cleaning and servicing en Tips on appliance care Action Benefit trol panel regularly us- Follow the tips on appliance care to ing a damp cloth and make sure your appliance functions washing-up liquid. properly at all times. If the appliance is not This will prevent un- Action Benefit... -
Page 42: Filter System
en Cleaning and servicing ¡ Make sure that there are no alu- Filter system minium parts, e.g. extractor hood The filter system removes coarse grease filters or aluminium pans, in soiling from the dishwashing cycle. the interior of the appliance. ¡ If you have not run Easy Clean after 3 washing cycles, the indic- ator for Easy Clean will go out automatically. -
Page 43: Cleaning Spray Arms
Cleaning and servicing en Pull down the micro filter to re- Cleaning spray arms move. Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove ... -
Page 44: Troubleshooting
en Troubleshooting Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 45 Troubleshooting en Fault Cause Troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide at the end of the pro- ted. scribed in the installation instruc- gramme. tions. The door gap must be at least 70 mm - 100 mm.
-
Page 46: Error Code / Fault Display / Signal
en Troubleshooting Error code / Fault display / Signal Fault Cause Troubleshooting E:2130 lights up. Intake opening of Zeolith Re-arrange the tableware in the ap- ▶ container is covered by pliance so the "Intake opening of the Zeolith container " → Page 15 items of tableware. - Page 47 Troubleshooting en Fault Cause Troubleshooting E:3200 or indicator for wa- Clean the filter. ter supply lights up. Re-insert the filter in the supply hose. Screw the water connection back Check the water connection for leaks. Restore the power supply. Switch the appliance on. E:9240 lights up.
-
Page 48: Washing Results
en Troubleshooting Fault Cause Troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:0100 to E:9010 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse. - Page 49 Troubleshooting en Fault Cause Troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Activate "Extra Dry" → Page 36. Extra Dry not activated to im- ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
- Page 50 en Troubleshooting Fault Cause Troubleshooting Remnants of food on table- Filters are soiled. Clean the filters. ▶ → "Cleaning filters", Page 42 ware. Filters are inserted incor- Insert the filters properly. → "Filter system", Page 42 rectly and/or not engaged. Engage the filters. Washing programme selec- Select a more intensive washing ▶...
- Page 51 Troubleshooting en Fault Cause Troubleshooting Water marks on plastic Due to laws of physics Select a more intensive pro- ▶ parts. droplet formation on plastic gramme. → "Programmes", Page 19 surfaces is unavoidable. After drying water marks are Position tableware at an angle. ▶...
- Page 52 en Troubleshooting Fault Cause Troubleshooting Tea residue or lipstick marks Washing temperature is too Select a programme with a higher ▶ on tableware. low. washing temperature. → "Programmes", Page 19 Too little detergent is being Use a suitable "Detergent " ▶ → Page 29 and follow the manufac- used or is unsuitable.
- Page 53 Troubleshooting en Fault Cause Troubleshooting Plastic parts are discol- Washing temperature is too Select a programme with a higher ▶ oured. low. washing temperature. → "Programmes", Page 19 Tableware has been pre- Only remove large remnants of food ▶ cleaned too intensely. The and do not prerinse tableware.
-
Page 54: Home Connect Problem
en Troubleshooting Fault Cause Troubleshooting Rust spots on cutlery. Cutlery is not sufficiently Use rust-resistant tableware. ▶ rust-resistant. Knife blades are often more severely af- fected. Cutlery may also rust if Do not wash rusting items. ▶ washed together with rust- ing items. -
Page 55: Information On Display Panel
Troubleshooting en Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 26. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... -
Page 56: Mechanical Damage
en Troubleshooting Fault Cause Troubleshooting → "Terminate programme", Programme starts automat- You did not wait until pro- ▶ ically. gramme ended. Page 35 Appliance stops during the Appliance door is not closed Close the appliance door. ▶ programme or cuts out. properly. Power and/or water supply Check the power supply. - Page 57 Troubleshooting en Fault Cause Troubleshooting Knocking or rattling noise. With a small load the water Distribute the tableware evenly. ▶ jets directly strike against Load the appliance with more table- ▶ the tub. ware. Light items of tableware Position light items of tableware se- ▶...
-
Page 58: Clean Wastewater Pump
en Transportation, storage and disposal Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 59: Protect Appliance From Frost
Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 60: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
en Technical specifications least 10 years from the date on from water damage, the appliance which your appliance was placed on must be connected to the power the market within the European Eco- supply. nomic Area. ¡ The liability guarantee is valid for the service life of the appliance. -
Page 61: Information Regarding Free And Open Source Software
Technical specifications en ternatively, you can also find the Power consumption Off mode/standby model identifier in the first line of the mode: 0.50 W EU energy label. Left-on mode: 0.50 W Networked standby: Information regarding Free 2.00 W Time in left-on mode: and Open Source Software 0 min This product includes software com- Time after which ap-... - Page 62 en Technical specifications meets the essential requirements and other relevant provisions of the Dir- ective 2014/53/EU. 2.4 GHz band: 100 mW max. A detailed RED Declaration of Con- 5 GHz band: 100 mW max. formity can be found online at www.neff-international.com among the additional documents on the product page for your appliance.
- Page 64 *9001561489* 9001561489 Constructa-Neff Vertriebs-GmbH Carl-Wery-Straße 34 81739 München GERMANY 010519 650 P5...