Related Manuals for Beko DIN48534
Summary of Contents for Beko DIN48534
- Page 1 Dishwasher User’s Manual Document Number : 18 7436 0100_AC_BEKO_E9_EN/ 16-04-20.(13:39)
- Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
- Page 3 Dishwasher User’s Manual Document Number : 18 7436 0100_AC_BEKO_E9_EN/ 16-04-20.(13:39)
- Page 4 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
-
Page 5: Table Of Contents
CONTENTS 1 INSTRUCTIONS FOR SAFETY Lower basket multipurpose / height adjustable service rack ..... 23 AND ENVIRONMENT Lower basket bottle wire ....24 General safety ........4 Upper basket height adjustable rack 24 Intended use ..........4 Upper basket multipurpose service Children’s safety ........5 rack ............ -
Page 6: Instructions For Safety And Environment
instructions for safety and environment This section contains safety wet hands! Never unplug by instructions that will help to get pulling on the cable, always protected from risk of personal pull out by grabbing the plug. injury or property damage. Failure The product must be •... -
Page 7: Children's Safety
instructions for safety and environment Children’s safety to be used in household and similar applications such as: Electrical products are • - Staff kitchen areas in shops, dangerous for the children. offices and other working Keep children away from the environments;... -
Page 8: Compliance With Weee Directive And Disposing Of The Waste Product
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations. -
Page 9: Dishwasher Overview
Dishwasher Overview 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Silverware basket (depends on model) 5. Door 6. Rating Label 7. Control panel 8. Detergent dispenser 9. Lower basket 10. Filters 11. Salt reservoir lid 12. Upper basket rail 13. -
Page 10: Fan Drying System
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label) -
Page 11: Installation
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be... -
Page 12: Connection To The Drain
Installation Permitted water temperature: connected to the drain hole or sink’s up to 25°C ( 60°C for products drainage. The length of this connection equipped with Aquasafe+; please must be min. 50 cm and max. 100 cm from refer toAquasafe+ section ) the floor. -
Page 13: Aquasafe
Installation Aquasafe+ The voltage and allowed fuse or breaker • protection are specified in the “Technical (depends on model) specifications” section. If the current The Aquasafe+ system protects against value of the fuse or breaker in the house water leaks that may occur at the hose is less than 16 Amps, have a qualified inlet.Water contact with the valve box of electrician install a 16 Amp fuse. -
Page 14: Preparation Tips For Energy Saving
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Washing, rinsing and drying performance efficient manner. of your dishwasher will improve when Wipe away any coarse food remnants on the water softening system is adjusted the dishes before putting them in the correctly. - Page 15 Preparation Make the necessary Unpack the test Dip in the test strip Take out the strip Wait for 1 minute. Open the tap and adjustment strip. into the water for 1 from the water and let the water flow for according to the test second.
-
Page 16: Adding Salt
Preparation If the hardness level of the water that It is recommended to use you use is above 50°dH or if you are using granule- or powder-formed well water, than it is recommended to use softening salts in the water filter and water purification devices.If the softening system. -
Page 17: Detergent
Preparation Adding detergent You can put about 2 kg of softening salt into the salt Pay attention to the warnings reservoir. on the detergent packaging to get better washing and 5. Replace the lid and tighten it when the drying results. Contact the reservoir is full. -
Page 18: Tablet Detergents
Preparation Inside the detergent dispenser there are level markings that help you use appropriate amount of powder detergent. When brimful, detergent dispenser will contain 45 cm³ of detergent. Fill detergent up to 15 cm³ or 25 cm³ level marks in the detergent dispenser according to fullness of the machine and/or soiling degree of the dishes. -
Page 19: Rinse Aid
Preparation Rinse aid The best washing performance in dishwashers is obtained by The rinse aid used in using detergent, rinse aid and dishwashers is a special water softening salt individually. combination that aims to increase drying efficiency and prevent water or lime stains on the washed items. -
Page 20: Items Not Suitable For Washing In The Dishwasher
Preparation Placing the dishes into the 4. If there are stains on tableware items after washing, level must be increased dishwasher and if there is a blue trace after wiping You can use your dishwasher in the them by hand, it must be decreased. optimum way with respect to energy This is set to position 3 as factory consumption and washing and drying... - Page 21 Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 19 / 45 EN...
-
Page 22: Cutlery Basket
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner. -
Page 23: Collapsible Lower Basket Tines
Preparation Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it There are foldable tines (A) located at the will be appropriate to bring the tines in the middle to horizontal lower basket of the machine are designed or vertical position by holding... -
Page 24: Tray Wash Supports
Preparation SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. -
Page 25: Lower Basket Multipurpose / Height Adjustable Service Rack
Preparation Lower basket multipurpose Make sure that the impeller / height adjustable service does not touch the dishes you rack placed on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2. -
Page 26: Lower Basket Bottle Wire
Preparation Lower basket bottle wire Upper basket multipurpose service rack (depends on model) The bottle wire is designed for easier (depends on model) washing of long pieces with wide mouths. This accessory located at the upper basket You may take out the bottle wire from the of your machine allows you to easily wash basket when not in use by pulling it out pieces such as extra long ladles and bread... -
Page 27: Adjusting The Height Of The Upper Basket
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B). -
Page 28: Collapsible Upper Basket Wires
Preparation Collapsible upper basket Height setting with empty wires basket (depends on model) (depends on model) You can use collapsible wires when you In this model, the height setting of the need a larger space for your dishes in the upper basket may be changed using the upper basket of your machine. -
Page 29: Ceiling Cutlery Basket
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc. -
Page 30: Operating The Product
Operating the product 7. Function Selection Keys On / Off Key TrayWash Function 2. Menu Key Fast+ Function 3. Time Delay Selection SteamGloss Function / Menu Direction Selection Keys Half Load function 4. Selection / Confirmation Key 5. Display 8. Programme Selection Keys 6. -
Page 31: Programme Selection / Programme Cancel Key
Operating the product On/Off Key Programme selection When you press the On/Off key, the Press the On/Off button to turn on indicator lights illuminate on the display your machine. for ON position. The lights turn off in OFF 2. Check the Salt and Rinse Aid indicators position. - Page 32 Operating the product /45 EN Dishwasher / User’s Manual...
-
Page 33: Auxiliary Functions
Operating the product Auxiliary functions Half Load function It is used to operate the machine without Washing programmes of your dishwasher loading it completely. are designed to obtain the best cleaning Load your dishes in the machine as you effect, considering the type of the soiling, like. - Page 34 Operating the product Functions in Settings Menu EverClean Function Off/On (depends on the model) Under the settings menu of your product, there are some additional functions that depend on the model. To access these functions, press and hold the Menu key for 3 seconds. Press <- and +>...
- Page 35 Operating the product Interior Lighting (depends on the model) Some models have interior lighting to illuminate the interior when the door is opened. After switching on your machine, press the Settings Menu key for 3 seconds. In some models pressing the Menu key only for once will allow you to enter the Settings menu.
-
Page 36: Scheduling The Washing Time
Operating the product Scheduling the washing the door of the product and wait for the draining process complete. Draining is time completed in 2 minutes and the machine Time Delay gives an audible warning when it is If an economical electricity tariff is applied completed. -
Page 37: Cancelling The Programme
Operating the product Cancelling the programme Adjusting the amount of rinse aid Open the door of the product Press and hold the Programme Selection / Programme After switching on your machine, press Cancel keys for 3 seconds. After the 3 - the Menu key for 3 second. -
Page 38: Water Cut-Off Warning
Operating the product For energy saving, the machine is automatically turned off following the completion of the programme or if the programme is not started. Leave your dishes in the machine for about 15 minutes to allow them cool down after they are washed. -
Page 39: Maintenance And Cleaning
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters. -
Page 40: Cleaning The Hose Filter
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. -
Page 41: Cleaning The Impellers
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers for the machine to work Check if the holes on the upper impeller (1) efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to remove the upper impeller. -
Page 42: Troubleshooting
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •... - Page 43 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
- Page 44 Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
- Page 45 Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
- Page 46 Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.