Epson EF-100WATV Quick Setup

EF-100WATV/EF-100BATV
Quick Setup
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Contents
Make sure your projector box includes all of these parts:
You can place the projector on almost any flat surface. See the online User's
Guide for more information.
Connect the projector
Streaming device
Connect the included Android TV streaming device to your projector. To stream
content, make sure you have an active streaming account and enter your login
information as necessary for each app.
Note: To connect other streaming devices, see the online User's Guide for more
information. The projector's HDMI port does not support MHL
1
Remove the rear cover of the projector.
2
Open the USB power cable clamp.
3
Connect the streaming device to the projector's HDMI extension cable.
4
Connect the USB power cable to the streaming device and fit the device
securely inside the projector.
Caution: Do not force the device into the projector; you may damage the
projector and/or the device.
5
Make sure the device is securely connected as shown below. Pass the USB
power cable through the clamp, then close the clamp to secure the cable.
6
Replace the rear cover of the projector.
.
®
Note: To pair a Bluetooth
headphones to your projector, see the online User's Guide.
External video source
You can connect an external video source with an HDMI cable (not included).
Caution: Do not turn on the video source before connecting it to the projector;
you may damage the projector.
Note: Some external video sources may require an optional HDMI adapter
cable.
1
Remove the rear cover of the projector.
2
Connect an HDMI cable to your video source's HDMI output port.
3
Connect the other end of the HDMI cable to the projector's HDMI
extension cable.
4
Pass the HDMI cable through the cable path as shown.
speaker or to connect an external speaker or
®