Overrun Error; Background Switching Mechanism Error - Fujitsu PA03768-B005 Operator's Manual

Overrun Error

Background Switching Mechanism Error

When a background switching mechanism error occurs, the [Error] screen on the touch screen displays one of
the following codes.
F4:C2 Background switching mechanism error (ADF Front)
If the problem persists after turning the power back on, please inform your service provider of the error
code below.
Code F4:C2
F4:C3 Background switching mechanism error (ADF Back)
If the problem persists after turning the power back on, please inform your service provider of the error
code below.
Code F4:C3
Open the ADF to check that there are no documents remaining, and then turn the scanner off then back on.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.
152
Troubleshooting