Efe914 Components - Electrolux EFEP956 Installation & User Manual

8 electrolux.com.au

EFE914 COMPONENTS

Gas hob, multi-function electric oven with electronic timer
5
1
1 Cooking function selector
2 Temperature control
Electronic clock control
3
4 Clock/timer display
5 Oven indicator
1 2
1
Semi rapid burner control
2 Auxiliary burner control
Wok burner control
3
4 Semi rapid burner control
4 5
3 2
3 4 5
6
7
8
9
10
11
Rapid burner control
5 9 Quadruple glazed door
6 Gas hob 10 Storage door
7 Control panel (see above) Removable kick panel
11
Exhaust air outlet
8
INSTALLATION OF EFE914, EFEP916 & EFEP956
Cabinet requirement
Models EFE914, EFEP916 & EFEP956 are designed to
fit into a 900mm wide gap between standard kitchen
cabinets. The appliance integrates with the kitchen
cabinets by matching the height, depth and kick panel.
The cooker may also be installed at the end of a line of
benches or with a free space either side. In addition, a
slot-in type installation is catered for allowing a continuous
cabinetry kick panel to be used.
WARNING!
• The cooker must be installed and serviced only by
an authorised person.
• A Certificate of Compliance MUST be supplied to
be kept by the customer.
• The packing materials must be removed before
you install the cooker.
• The surrounding kitchen cabinets must be able
to withstand 85°C. Electrolux WILL NOT accept
responsibility for damage caused by installation into
kitchen cabinets which cannot withstand 85°C.
• The pipes used for installation MUST have sufficient
loops so the cooker can be moved for service (gas
models).
• The vents, openings and air spaces MUST NOT
be blocked.
• Two anti-tilt brackets are supplied and stored in the
base of the packaging
• The anti-tilt brackets and chain or front stops MUST
be installed to avoid accidental tipping (freestanding
and slot-in models).
• You MUST NOT lift or pull the cooker by the door
handle.
• The cooker MUST be checked every five years.
• If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• The appliance must not be installed behind a
decorative door in order to avoid overheating.
• Due to the weight (95-100kg) and size of the cooker,
2 persons are required to install it.
Gas model clearance requirements
• Ensure the appliance is installed in accordance
with clauses 6.2.5 and 6.10.1.1 of AS/NZS 5601.1
or clauses 6.9.1 and 6.9.5 of AS/NZS 5601.2 with
regard to clearances to combustible surfaces and
materials, and clearances to rangehoods and exhaust
fans, to ensure clearances of 200mm from burners to
vertical combustible surfaces observe the minimum
dimension of 100mm from each side of the cooker to
combustible surfaces.
• Clearances to combustible surfaces may be reduced
if combustible surfaces are protected in accordance
with clause 6.10.1.2 of AS/NZS 5601.1, or clause 6.9.2
of AS/NZS 5601.2.
• When setting the cooker height, ensure the top of the
cooker is at least 10mm higher than the level of the
benchtop.
Dimensions
Splashback
The splashback is secured to the back of the cooker.
REMOVE the splashback before installing the feet.
9